Asus P5MT-S User Guide - Page 50

12. Power supply SMBus connector (5-pin PSUSMB1) This connector is for the power supply SMB cable, if your power supply supports the SMBus function. ® P5MT-S PSU_I2CCLK PSU_I2CDATA NC GND +3.3V Remote Sense PSUSMB1 P5MT-S Power Supply SMBus Connector 13. SSI power connectors (24-pin ATXPWR1, 8-pin ATX12V2) These connectors are for SSI power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • Use of an SSI 12 V Specification 2.0-compliant power supply unit (PSU) that provides a minimum power of 450 W is recommended for a fully-configured system. • By default, four ATX12V2 connector pins are covered to prevent incorrent insertion of a 4-pin ATX +12V power plug. Remove this cover when using a PSU with an 8-pin ATX +12V power plug. • Do not forget to connect the 4-pin or 8-pin ATX +12 V power plug; otherwise, the system will not boot up. • We recommend that you use a PSU with a higher power output when configuring a system with more power consuming devices. The system may become unstable or may not boot up if the power is inadequate. • You must install a PSU with a higher power rating if you intend to install additional devices. ATXPWR1 24-pin Power Connector ATX12V2 GND GND GND GND +3 Volts +3 Volts Ground +5 Volts Ground +5 Volts Ground Power OK +5V Standby +12 Volts +12 Volts +3 Volts ® P5MT-S +12V DC +12V DC +12V DC +12V DC 1 P5MT-S ATX Power Connectors 2-30 +3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground Chapter 2: Hardware information