Asus P5SD2-X SE Motherboard Installation Guide - Page 42
P5SD2-X SE Internal Audio Connectors
View all Asus P5SD2-X SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
P5SD2-X SE Right Audio Channel Ground Ground Left Audio Channel Right Audio Channel Ground Ground Left Audio Channel 8. Internal audio connectors (4-pin CD, AUX) These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV-tuner, or MPEG card. ® CD(Black) AUX(White) P5SD2-X SE Internal Audio Connectors 9. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS ® (Default) P5SD2-X SE Intrusion Connector P5SD2-X SE +5VSB_MB Chassis Signal GND 1-30 Chapter 1: Product introduction