Asus P5VD1-X P5VD1-X User's Manual for English Edition - Page 42

Internal connectors

Get Asus P5VD1-X PDF manuals and user guides View all Asus P5VD1-X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

2.7.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5. FLOPPY P5VD1-X ® PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. P5VD1-X Floppy disk drive connector 2. Primary/Secondary IDE connector (40-1 pin PRI_IDE, SEC_IDE) This connector supports the provided UltraATA133 IDE hard disk ribbon cable. Connect the cableʼs blue connector to the primary (recommended) or secondary IDE connector, the black connector for the UltraATA133 master device. 1. Follow the hard disk drive documentation when setting the device in master or slave mode. 2. Pin 20 on each IDE connector is removed to match the covered hole on the UltraATA cable connector. This prevents incorrect orientation when you connect the cables. 3. The hole near the blue connector on the UltraATA cable is intentional. NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. PRI_IDE SEC_IDE P5VD1-X ® P5VD1-X IDE connectors PIN 1 2-22 Chapter 2: Hardware Information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
2-22
Chapter 2: Hardware Information
2.7.2
Internal connectors
1.
Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.
P5VD1-X
NOTE:
Orient the red markings on
the floppy ribbon cable to PIN 1.
P5VD1-X Floppy disk drive connector
FLOPPY
PIN 1
2.
Primary/Secondary IDE connector (40-1 pin PRI_IDE,
SEC_IDE)
This connector supports the provided UltraATA133 IDE hard disk ribbon cable.
Connect the cableʼs blue connector to the primary (recommended) or secondary
IDE connector, the black connector for the UltraATA133 master device.
1.
Follow the hard disk drive documentation when setting the device in master
or slave mode.
2.
Pin 20 on each IDE connector is removed to match the covered hole on the
UltraATA cable connector. This prevents incorrect orientation when you
connect the cables.
3.
The hole near the blue connector on the UltraATA cable is intentional.
P5VD1-X
P5VD1-X IDE connectors
NOTE:
Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
PRI_IDE
PIN 1
SEC_IDE