Asus P5VD2 MX P5VD2-MX/P5V-VM DH English Edition User's Manual - Page 66

2.3.5 SATA 1/2 While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press to display the SATA device information. Main Phoenix-Award BIOS CMOS Setup Utility Extended IDE Drive Access Mode Capacity Cylinder Head Landing Zone Sector SATA 1 [Auto] [Auto] 0 MB 0 0 0 0 Select Menu Item Specific Help Selects the type of fixed disk connected to the system. F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu -/+: Change Value Enter: Select SubMenu F5: Setup Defaults F10: Save and Exit The BIOS automatically detects the values opposite the dimmed items (Capacity, Cylinder, Head, Landing Zone and Sector). These values are not user-configurable. These items show 0 if no SATA device is installed in the system. Extended Drive [Auto] Selects the type of fixed disk connected to the system. Configuration options: [None] [Auto] Access Mode [Auto] Sets the sector addressing mode. Configuration options: [Large] [Auto] Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. Capacity Displays the auto-detected hard disk capacity. This item is not configurable. Cylinder Shows the number of the hard disk cylinders. This item is not configurable. 2-18 Chapter 2: BIOS Setup