Asus P5VD2 MX P5VD2-MX/P5V-VM DH English Edition User's Manual - Page 79

2.5.4 Hardware Monitor The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an item then press to display the configuration options. Phoenix-Award BIOS CMOS Setup Utility Power Hardware Monitor Q-Fan Controller Vcore Voltage 3.3V Voltage 5V Voltage 12V Voltage [Enabled] [1.56V] [3.30V] [5.05V] [11.58V] CPU Temperature M/B Temperature CPU Fan Speed Chassis Fan Speed CPU Fan Speed warning Start Up Temperature(ºC) Full Speed Temperature(ºC) Start Up PWM Slope PWM 48ºC 41ºC 3068 RPM 0 RPM [800 RPM] [50] [70] [60] [4 PWM/ºC] Select Menu Item Specific Help Press [Enter] to enable or disable F1:Help ↑↓ : Select Item ESC: Exit →←: Select Menu -/+: Change Value F5: Setup Defaults Enter: Select SubMenu F10: Save and Exit Q-Fan Controller [Enabled] Allows you to enable or disable the Q-Fan controller. Configuration options: [Disabled] [Enabled] Vcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Configuration options: [xxx] [Ignored] CPU Temperature, M/B Temperature The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. These items are not user-configurable. CPU Fan Speed [xxxxRPM] Chassis Fan Speed [xxxxRPM] The onboard hardware monitor automatically detects and displays the CPU, Chassis, and chip fan speeds in rotations per minute (RPM). If any of the fans is not connected to the motherboard, the field shows 0. These items are not user-configurable. CPU Fan Speed warning [800 RPM] Sets the CPU fan speed warning feature. Configuration options: [Disabled] [800RPM] [1200RPM] [1600RPM] ASUS P5VD2-MX/P5V-VM DH 2-31