Asus P5WD2 Motherboard Installation Guide - Page 92

4.4.3 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. USB Configuration Module Version - 2.24.0-F.4 USB Devices Enabled: None USB Function Legacy USB Support USB 2.0 Controller USB 2.0 Controller Mode BIOS EHCI Hand-off [Enabled] [Auto] [Enabled] [HiSpeed] [Disabled] USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20] Emulation Type [Auto] Enables USB host controllers. The M o d u l e V e r s i o n and U S B D e v i c e s E n a b l e d items show the auto-detected values. If no USB device is detected, the item shows N o n e. USB Function [Enabled] Enables or disables the USB host controllers. Configuration options: [Disabled] [Enabled] Legacy USB Support [Auto] Allows you to enable or disable support for legacy USB devices. Setting to [Auto] allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] USB 2.0 Controller [Enabled] Allows you to enable or disable the USB 2.0 controller. Configuration options: [Enabled] [Disabled] The following items appear only when the U S B 2 . 0 C o n t r o l l e r is set to [Enabled]. USB 2.0 Controller Mode [HiSpeed] Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed (12 Mbps). Configuration options: [HiSpeed ] [FullSpeed ] 4-24 Chapter 4: BIOS setup