Asus P6X58-E PRO User Manual - Page 52
Marvell, Serial ATA 6Gb/s connectors, pin SATA_6G_E1, 7-pin SATA_6G_E2 [navy blue]
View all Asus P6X58-E PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 2 2. Marvell® Serial ATA 6Gb/s connectors (7-pin SATA_6G_E1, 7-pin SATA_6G_E2 [navy blue]) These connectors are for the Serial ATA 6Gb/s signal cables for Serial ATA 6Gb/s hard disk drives. • These connectors are set to AHCI Mode by default. • You must install Windows® XP Service Pack 2 or later versions before using Serial ATA hard disk drives. • Press + during POST to enter the Marvell RAID utility to create or delete a RAID configuration. • If you want to install a Windows operating system to a RAID configuration created using the Marvell SATA controller, you have to create a RAID driver disk using the motherboard support DVD and load the driver during OS installation. For 32/64bit Windows XP OS, load first the Marvell shared library driver, and then load Marvell 91xx SATA Controller Driver. For Windows Vista / Windows 7 OS, load only the Marvell 91xx SATA Controller Driver. 2-32 Chapter 2: Hardware information