Asus P7H55-M LX User Manual - Page 38
Onboard Devices Configuration - processor support
View all Asus P7H55-M LX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Intel(R) SpeedStep(TM) Tech [Enabled] When this item is set to [Enabled], the CPU speed is controlled by the operating system. When this item is set to [Disabled], the CPU runs at its default speed. Configuration options: [Enabled] [Disabled] Intel(R) TurboMode Tech [Enabled] This item appears only if you set the CPU Ratio Setting item to [Auto]. Turbo mode allows processor cores to run faster than marked frequency in specific condition. Configuration options: [Disabled] [Enabled] Intel(R) C-STATE Tech [Enabled] Allows you enable or disable the Intel® C-STATE Technology. When enabled, the CPU idle is set to C2/C3/C4/C6. Configuration options: [Disabled] [Enabled] C State package limit setting [Auto] This item appears only when you set the Intel® C-STATE Tech item to [Enabled]. We recommend that you set this item to [Auto] for BIOS to automatically detect the C-State mode supported by your CPU. Configuration options: [Auto] [C1] [C3] [C6] 2.4.2 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press to display the submenu. Uncore configuration DRAM Frequency [Auto] Allows you to adjust the DRAM frequency. Configuration options: [Auto] [DDR3-800 MHz] [DDR3-1066 MHz] [DDR3-1333 MHz] Memory Remap Feature [Enabled] Allows you to enabled or disable the remapping of the overlapped PCI memory above the total physical memory. Enable this option only when you install 64-bit operating system. Configuration options: [Disabled] [Enabled] Initiate Graphic Adapter [PCIE/PCI] Allows you to decide which graphics controller to use as the primary boot device. The configuration options for this item vary with CPUs. When a Lynnfield CPU is installed, the default setting is [PCIE/PCI]. The configuration options are [PCI/PCIE] [PCIE/PCI]. When a Clarkdale CPU is installed, the default setting is [PEG/PCI]. The configuration options are [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]. 2.4.3 Onboard Devices Configuration HDA Controller [Enabled] Allows you to enable or disable the high definition audio controller. Configuration options: [Enabled] [Disabled] Front Panel Type [HD Audio] Allows you to select the front panel type. If High Definition Audio Front Panel used, please set HD Audio mode. Configuration options: [AC97] [HD Audio] 2-12 Chapter 2: BIOS information