Home » Asus Manuals » Motherboards » Asus P7H55 USB3 » Manual Viewer

Asus P7H55 USB3 User Guide - Page 35

This connector is for an additional Sony/Philips Digital Interface S/PDIF ports.

Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

2. CPU, chassis, and power fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN, 3-pin PWR_FAN) The fan connectors support cooling fans of 350 mA~1000 mA (12 W max.) or a total of 1 A~4 A (48 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! • Only the CPU_FAN and CHA_FAN connectors support the FAN Xpert feature. • If you install two VGA cards, we recommend that you plug the rear chassis fan cable to the motherboard connector labeled CHA_FAN for better thermal environment. 3. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. ASUS P7H55/USB3 1-23

Section	Page
P7H55/USB3 specifications summary	9
Chapter 1: Product introduction	13
1.1 Before you proceed	13
1.2 Motherboard overview	14
1.2.1 Motherboard layout	14
1.2.2 Layout contents	14
1.3 Central Processing Unit (CPU)	15
1.3.1 Installing the CPU	15
1.3.2 Installing the CPU heatsink and fan	18
1.3.3 Uninstalling the CPU heatsink and fan	19
1.4 System memory	20
1.4.1 Overview	20
1.4.2 Memory configurations	21
1.4.3 Installing a DIMM	28
1.4.4 Removing a DIMM	28
1.5 Expansion slot	29
1.5.1 Installing an expansion card	29
1.5.2 Configuring an expansion card	29
1.5.3 PCI slots	29
1.5.4 PCI Express x1 slots	29
1.5.5 PCI Express 2.0 x16 slots	29
1.6 Jumpers	30
1.7 Onboard switches	31
1.8 Connectors	33
1.8.1 Rear panel connectors	33
1.8.2 Internal connectors	34
1.9 Installing an operating system	40
1.10 Support DVD information	40
1.10.1 Running the support DVD	40
Chapter 2: BIOS setup	41
2.1 Managing and updating your BIOS	41
2.1.1 ASUS Update	41
2.1.2 ASUS EZ Flash 2	42
2.1.3 ASUS CrashFree BIOS 3 utility	43
2.2 BIOS setup program	44
2.3 Main menu	44
2.3.1 SATA 1-6	45
2.3.2 Storage Configuration	46
2.3.3 AHCI Configuration	46
2.3.4 System Information	47
2.4 Ai Tweaker menu	48
2.4.1 CPU Level Up [Auto]	48
2.4.2 Ai Overclock Tuner [Auto]	49
2.4.3 CPU Ratio Setting [Auto]	49
2.4.4 Intel(R) SpeedStep(TM) Tech [Enabled]	50
2.4.5 Intel(R) TurboMode Tech [Enabled]	50
2.4.6 Xtreme Phase Full Power Mode [Auto]	50
2.4.7 DRAM Frequency [Auto]	50
2.4.8 QPI Frequency [Auto]	50
2.4.9 ASUS/3rd Party UI Priority [ASUS Utility]	50
2.4.10 OC Tuner [Turbo Profile]	51
2.4.11 Start auto tuning	51
2.4.12 DRAM Timing Control [Auto]	51
2.4.13 CPU Differential Amplitude [Auto]	53
2.4.14 CPU Clock Skew [Auto]	53
2.4.15 CPU Voltage Mode [Offset]	53
2.4.16 IMC Voltage [Auto]	53
2.4.17 DRAM Voltage [Auto]	53
2.4.18 CPU PLL Voltage [Auto]	54
2.4.19 PCH Voltage [Auto]	54
2.4.20 DRAM DATA REF Voltage on CHA/B [Auto]	54
2.4.21 Load-Line Calibration [Auto]	54
2.4.22 CPU Spread Spectrum [Auto]	54
2.4.23 PCIE Spread Spectrum [Auto]	54
2.5 Advanced menu	55
2.5.1 CPU Configuration	55
2.5.2 Uncore Configuration	57
2.5.3 Onboard Device Configuration	57
2.5.4 USB Configuration	57
2.5.5 PCIPnP	58
2.5.6 Intel VT-d Configuration [Disabled]	58
2.6 Power menu	59
2.6.1 Suspend Mode [Auto]	59
2.6.2 Repost Video on S3 Resume [No]	59
2.6.3 ACPI 2.0 Support [Disabled]	59
2.6.4 ACPI APIC Support [Enabled]	59
2.6.5 EuP Ready [Disabled]	59
2.6.6 APM Configuration	60
2.6.7 Hardware Monitor	61
2.7 Boot menu	62
2.7.1 Boot Device Priority	62
2.7.2 Boot Settings Configuration	62
2.7.3 Security	63
2.8 Tools menu	65
2.8.1 ASUS O.C. Profile	65
2.8.2 AI NET 2	65
2.8.3 ASUS EZ Flash 2	66
2.8.4 Express Gate [Auto]	66

Match case Limit results 1 per page

ASUS P7H55/USB3

1-23

Do not forget to connect the fan cables to the fan connectors. Insufﬁcient air ﬂow inside the

system may damage the motherboard components. These are not jumpers! Do not place

jumper caps on the fan connectors!

CPU, chassis, and power fan connectors

(4-pin CPU_FAN, 3-pin CHA_FAN, 3-pin PWR_FAN)

The fan connectors support cooling fans of 350 mA~1000 mA (12 W max.) or a total

of 1 A~4 A (48 W max.) at +12V. Connect the fan cables to the fan connectors on the

motherboard, making sure that the black wire of each cable matches the ground pin of

the connector.

•

Only the CPU_FAN and CHA_FAN connectors support the FAN Xpert feature.

•

If you install two VGA cards, we recommend that you plug the rear chassis fan cable to

the motherboard connector labeled CHA_FAN for better thermal environment.

Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s).

Connect the S/PDIF Out module cable to this connector, then install the module to a

slot opening at the back of the system chassis.

The S/PDIF module is purchased separately.