Asus P8H67 User Manual - Page 42
P8H67 Front panel audio connector
View all Asus P8H67 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
8. USB connectors (10-1 pin USB78, USB910, USB1112 ) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with the USB 2.0 specification that supports up to 480Mbps connection speed. USB+5V USB_P10USB_P10+ GND NC USB+5V USB_P12USB_P12+ GND NC USB+5V USB_P14USB_P14+ GND NC USB78 USB910 USB1112 P8H67 PIN 1 PIN 1 PIN 1 USB+5V USB_P9USB_P9+ GND USB+5V USB_P11USB_P11+ GND USB+5V USB_P13USB_P13+ GND P8H67 USB2.0 connectors Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. 9. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either High Definition Audio or AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AAFP SENSE2_RETUR PORT2 L NC Line out_L SENSE_SEND NC P8H67 SENSE1_RETUR PORT2 R NC Line out_R PRESENCE# PORT1 R NC MICPWR GND PORT1 L AGND MIC2 PIN 1 PIN 1 HD-audio-compliant pin definition Legacy AC'97 compliant definition P8H67 Front panel audio connector If you want to connect a high-definition front panel audio module to this connector, ensure that the Front Panel Type item in the BIOS is set to [HD Audio]. If you want to connect an AC97 front panel audio module to this connector, set the item to [AC97]. See section 2.5.6 Onboard Devices Configuration for details. 1-30 Chapter 1: Product introduction