Asus P9X79-E WS User Guide

Asus P9X79-E WS Manual

Get Asus P9X79-E WS PDF manuals and user guides View all Asus P9X79-E WS manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P9X79-E WS manual content summary:

  • Asus P9X79-E WS | User Guide - Page 1
    P9X79-E WS Motherboard
  • Asus P9X79-E WS | User Guide - Page 2
    express written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL
  • Asus P9X79-E WS | User Guide - Page 3
    viii About this guide...ix P9X79-E WS specifications summary xi Chapter 1: Product Introduction 1.1 Welcome!...1-3 1.2 Package contents 1-3 1.3 Special features 1-4 1.3.1 Product highlights 1-4 1.3.2 ASUS Workstation Exclusive Features 1-5 1.3.3 ASUS features 1-6 1.3.4 Other special
  • Asus P9X79-E WS | User Guide - Page 4
    3-45 3.10.2 ASUS EZ Flash 2 utility 3-48 3.10.3 ASUS CrashFree BIOS 3 utility 3-49 3.10.4 ASUS BIOS Updater 3-50 Chapter 4: Software support 4.1 Installing an operating system 4-3 4.2 Support DVD information 4-3 4.2.1 Running the support DVD 4-3 4.2.2 Obtaining the software manuals
  • Asus P9X79-E WS | User Guide - Page 5
    4-16 4.3.10 TurboV EVO 4-17 4.3.11 USB 3.0 Boost 4-21 4.3.12 Audio configurations 4-22 4.3.13 ASUS Dr. Power Utility 4-23 4.4 RAID configurations 4-25 4.4.1 RAID definitions 4-25 4.4.2 Installing Serial ATA hard disks 4-26 4.4.3 Setting the RAID item in BIOS 4-26 4.4.4 Intel® Rapid Storage
  • Asus P9X79-E WS | User Guide - Page 6
    . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Asus P9X79-E WS | User Guide - Page 7
    in our products at ASUS website at http://csr.asus.com/english/REACH.htm. ASUS Recycling/Takeback Services ASUS recycling and takeback go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. DO NOT throw the motherboard in municipal waste. This
  • Asus P9X79-E WS | User Guide - Page 8
    service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals , keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry. • Avoid dust, humidity, and temperature extremes. Do not
  • Asus P9X79-E WS | User Guide - Page 9
    need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware information This chapter lists
  • Asus P9X79-E WS | User Guide - Page 10
    of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete
  • Asus P9X79-E WS | User Guide - Page 11
    P9X79-E WS specifications summary CPU Chipset Memory Expansion Slots Multi-GPU support GPU support Storage LAN USB 2nd Generation Intel® Core™ i7 Processor for the LGA 2011 Socket Intel® Xeon® E5-1600 processor for the LGA 2011 Socket Intel® Xeon® E5-2600 processor for the LGA 2011 Socket Supports
  • Asus P9X79-E WS | User Guide - Page 12
    P9X79-E WS specifications summary 1394 Audio ASUS Unique Features ASUS Q-Design Workstation Unique Features VIA VT6315N controller support 1x1394a port Realtek® ALC 1150 8-channel High Definition Audio CODEC - Supports 192kHz/ 24bit BD Lossless Sound - DTS Surround Sensation UltraPC II - Supports
  • Asus P9X79-E WS | User Guide - Page 13
    ports (blue) 10 x USB 2.0/1.1 ports (white port can be switched to USB BIOS Flashback) 1 x USB BIOS Flashback Switch 1 x PS/2 KB/MS port 2 x eSATA 6Gb/s ports 2 x LAN (RJ45) ports (2 x Intel® LAN) 1 x optical S/PDIF Out port 8-channel Audio I/O 1 x USB 3.0/2.0 connector support additional 2 USB
  • Asus P9X79-E WS | User Guide - Page 14
    xiv
  • Asus P9X79-E WS | User Guide - Page 15
    Chapter 1: Product Introduction
  • Asus P9X79-E WS | User Guide - Page 16
    Chapter summary 1 This chapter describes the motherboard features and the new technologies it supports. This chapter contains the following sections: 1.1 Welcome!...1-3 1.2 Package contents 1-3 1.3 Special features 1-4 ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 17
    (I/O shield) 1 x ASUS 2-in-1 Q-Connector Kit (Retail version only) 1 x 2-Way SLI bridge connector 1 x 3-Way SLI bridge connector 1 x 4-Way SLI bridge connector ASUS motherboard support DVD User guide If any of the above items is damaged or missing, contact your retailer. ASUS P9X79-E WS 1-3
  • Asus P9X79-E WS | User Guide - Page 18
    Product highlights Intel® Socket 2011 for 2nd Generation Intel® Core™ i7 Processor Extreme Edition This motherboard supports the latest Intel® 2nd Generation Core™ i7 Processor Extreme in LGA2011 package, with memory and PCI Express controllers integrated to quadchannel (8 DIMMs) DDR3 memory and 40
  • Asus P9X79-E WS | User Guide - Page 19
    , the P9X79-E WS is built in dual Intel® Gigabit LAN that features lower CPU utilization, less package drop rate, wide driver supported. Base on performance testing, CPU utilization of Intel lan can achieve great improvement to allocate CPU resource more efficiently. Intel lan also support teaming
  • Asus P9X79-E WS | User Guide - Page 20
    digital controllers onboard, users can adjust CPU and DRAM PWM voltages and frequencies for various overclocking scenarios, with accurate input through UEFI BIOS tuning or the exclusive ASUS interface. System performance can also be customized with specific CPU and DRAM power controls, including new
  • Asus P9X79-E WS | User Guide - Page 21
    push the dedicated button for 3 seconds, and the BIOS is automatically flashed using standby power. Worry-free overclocking for the ultimate convenience! ASUS Quiet Thermal Solution ASUS Quiet Thermal solution makes system more stable and enhances the overclocking capability. ASUS P9X79-E WS 1-7
  • Asus P9X79-E WS | User Guide - Page 22
    ! Quick and easy info for enhanced system control - F12 BIOS snapshot hotkey for sharing UEFI setup info and troubleshooting - New F3 Shortcut for most accessed info - ASUS DRAM SPD (Serial Presence Detect) Information for accessing memory info, detecting faulty DIMMs and helping with difficult POST
  • Asus P9X79-E WS | User Guide - Page 23
    front panel cables to the motherboard. This unique module eliminates the trouble of connecting the system panel cables one at a time and avoiding wrong cable connections. ASUS EZ-Flash 2 ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without using a bootable floppy
  • Asus P9X79-E WS | User Guide - Page 24
    1-10 Chapter 1: Product Introduction
  • Asus P9X79-E WS | User Guide - Page 25
    Chapter 2: Hardware Information
  • Asus P9X79-E WS | User Guide - Page 26
    description of the jumpers and connectors on the motherboard. This chapter contains the following sections: 2.1 Before you proceed 2-3 2.2 Motherboard overview 2-4 2.3 Building your computer system 2-37 2.4 Starting up for the first time 2-52 2.5 Turning off the computer 2-52 ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 27
    of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling do so may cause severe damage to the motherboard, peripherals, or components. ASUS P9X79-E WS 2-3
  • Asus P9X79-E WS | User Guide - Page 28
    2.2 Motherboard overview 2.2.1 Motherboard layout Refer to 2.2.9 Internal Connectors for more information about rear panel connectors and internal connectors. 2-4 Chapter 2: Hardware information
  • Asus P9X79-E WS | User Guide - Page 29
    Serial port connector (10-1 pin COM1) 2-34 20. Clear RTC RAM (3-pin CLRTC) 2-24 21. Chassis Fan control setting (3-pin CHAFAN_SEL) 2-25 22. TPU switch 2-12 23. Front panel audio connector (10-1 pin AAFP) 2-33 24. Digital audio connector (4-1 pin SPDIF_OUT) 2-31 ASUS P9X79-E WS 2-5
  • Asus P9X79-E WS | User Guide - Page 30
    (CPU) The motherboard comes with a surface mount LGA2011 socket designed for the 2nd Generation Intel® Core™ i7 Processor Extreme Edition. Ensure that all power cables are unplugged before installing the CPU. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket
  • Asus P9X79-E WS | User Guide - Page 31
    module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations DIMM_D1 DIMM_B1 DIMM_D1 DIMM_A1 DIMM_B1 DIMM_D1 DIMM_C1 DIMM_A1 DIMM_B1 DIMM_B2 DIMM_D2 DIMM_D1 DIMM_C1 DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 DIMM_D2 DIMM_D1 DIMM_C2 DIMM_C1 ASUS P9X79-E WS 2-7
  • Asus P9X79-E WS | User Guide - Page 32
    or less (Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB). For system stability, use a more efficient memory cooling system to support a full memory load (8 DIMMs) or overclocking condition. P9X79-E WS Motherboard Qualified Vendors Lists Refer to www.asus.com for the Memory QVL
  • Asus P9X79-E WS | User Guide - Page 33
    damage motherboard components. dual at x8/x8 mode, blue) PCIEX16_4 PCIe 3.0 x16_6 slot (x8 mode, black) PCIEX16_5 PCIe 3.0 x16_1 slot (single at x16 mode, blue) PCIEX16_6 PCIe 3.0 x16_6 slot (x8 mode, black) PCIEX16_7 PCIe 3.0 x16_1 slot (single at x16 or dual at x8/x8 mode, blue) ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 34
    dual VGA recommended) x16 x16 7 x16 • We recommend that you provide sufficient power when running CrossFireX™ or SLI™ mode. • Connect a chassis fan to the motherboard - shared HD Audio - - - - - - shared - Asmedia SATA 6G - - - shared - - - - 2-10 Chapter 2: Hardware information
  • Asus P9X79-E WS | User Guide - Page 35
    for overclockers and gamers who continually change settings to enhance system performance. 1. Power-on button The motherboard motherboard component. The illustration below shows the location of the onboard power-on switch. 2. Reset button Press the reset switch to reboot the system. ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 36
    3. EPU switch Turning this switch to Enable will automatically detect the current PC loadings and intelligently moderate the power consumption. For ensuring system performance, turn the switch setting to Enable when the system is powered off. 4. TPU switch Turning this switch to Enable will
  • Asus P9X79-E WS | User Guide - Page 37
    load BIOS default settings. A messgae will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from the ASUS website at www.asus.com after using the MemOK! function. ASUS P9X79-E WS 2-13
  • Asus P9X79-E WS | User Guide - Page 38
    switch This switch allows you to enable or disable the ASUS Dr. Power feature. Install the bundled ASUS Dr. Power Utility then enable this switch to allow the system to display notification messages in your Windows screen if a problem is detected with your power supply unit (PSU). 2-14 Chapter
  • Asus P9X79-E WS | User Guide - Page 39
    . If an error is found, the LED next to the error device will continue lighting until the problem is solved. This user-friendly design provides an intuitional way to locate the root problem in seconds. 2. EPU LED The EPU LED lights when the EPU switch is turned to Enable. ASUS P9X79-E WS 2-15
  • Asus P9X79-E WS | User Guide - Page 40
    3. TPU LED The TPU LED lights up when the TPU switch is turned to Enable. 4. Q-Code LED The Q-Code LED design provides you the 2-digit display, allowing you to know the system status. Refer to the Q-Code table on the next page for details. 2-16 Chapter 2: Hardware information
  • Asus P9X79-E WS | User Guide - Page 41
    09 0A 0B 0C - 0D 0E 0F 10 11 - 14 15 - 18 19 - memory CPU initialization is started Pre-memory System Agent initialization is started Pre-memory PCH initialization is started Pre-memory initialization codes Memory initialization Reserved for ASL (see ASL Status Codes section below) ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 42
    Memory initialization error. Invalid memory type or incompatible memory speed Unspecified memory initialization error Memory not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed Internal CPU
  • Asus P9X79-E WS | User Guide - Page 43
    the PCH Runtime Services CPU DXE initialization (PCH module specific) ACPI module initialization Driver connecting is started PCI Bus initialization is started PCI Bus Hot Plug Controller Initialization PCI Bus Enumeration PCI Bus Request Resources PCI Bus Assign Resources ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 44
    Q-Code table (continued) Code 97 98 99 9A 9B 9C 9D 9E-9F A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB Description Console Output devices connect Console input devices connect Super IO Initialization USB initialization is started USB Reset USB Detect USB Enable Reserved for future AMI codes IDE
  • Asus P9X79-E WS | User Guide - Page 45
    below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual future AMI codes BDS initialization codes CPU initialization error System Agent initialization error update is failed Reset protocol is not available ASUS P9X79-E WS 2-21
  • Asus P9X79-E WS | User Guide - Page 46
    mode. 0xAA System has transitioned into ACPI mode. Interrupt controller is in APIC mode. 5. PWR_SUPPLY LED The ASUS Dr. Power LED near EATX PWR connector lights up when the ASUS Dr. Power switch setting is turned to Enable and the power supply unit failed. 2-22 Chapter 2: Hardware information
  • Asus P9X79-E WS | User Guide - Page 47
    the ASUS Dr. Power switch lights up when the ASUS Dr. Power switch is turned to enable. 7. +12V_PWR LED The ASUS Dr. Power LED near EATX12V connector lights up when the ASUS Dr. Power switch setting is turned to enable and there is no power detected going into the processor. ASUS P9X79-E WS 2-23
  • Asus P9X79-E WS | User Guide - Page 48
    RAM 1. Turn OFF the computer and unplug the power cord. 2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5-10 overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS
  • Asus P9X79-E WS | User Guide - Page 49
    fan but set the jumper for a 4-pin fan, the fan control will not work and the fan you installed will always run at full speed. ASUS P9X79-E WS 2-25
  • Asus P9X79-E WS | User Guide - Page 50
    2.2.9 Internal connectors 1. Intel® X79 Serial ATA 6.0 Gb/s connectors (7-pin manual bundled in the motherboard support DVD. • When using hot-plug and NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service
  • Asus P9X79-E WS | User Guide - Page 51
    the BIOS to [AHCI Mode]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions. ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 52
    , you have to create a RAID driver disk using the motherboard support DVD and load the driver during OS installation. For 32/64bit Windows XP OS, load first the Marvell shared library driver, and then load Marvell 92xx SATA Controller Driver. For Windows 7 / Windows 8 OS, load only the Marvell
  • Asus P9X79-E WS | User Guide - Page 53
    for the additional USB 3.0 ports, and complies with the USB 3.0 specificaton that supports up to 5.0 Gbps connection speed. If the USB 3.0 front panel cable is . You can connect the ASUS front panel USB 3.0 box to this connector to obtain the front panel USB 3.0 solution. ASUS P9X79-E WS 2-29
  • Asus P9X79-E WS | User Guide - Page 54
    chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and then install
  • Asus P9X79-E WS | User Guide - Page 55
    module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. ASUS P9X79-E WS 2-31
  • Asus P9X79-E WS | User Guide - Page 56
    the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! • The CPU_FAN connector supports the CPU fan of maximum 2A (24 W) fan power. • If you install two VGA cards, we
  • Asus P9X79-E WS | User Guide - Page 57
    connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD]; if you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD]. ASUS P9X79-E WS 2-33
  • Asus P9X79-E WS | User Guide - Page 58
    (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. The COM module is purchased separately. 11. TPM connector (20-1 pin TPM) This connector supports a Trusted
  • Asus P9X79-E WS | User Guide - Page 59
    power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. • If you want to use two be needed. Use this connector to enhance power by 12V. ASUS P9X79-E WS 2-35
  • Asus P9X79-E WS | User Guide - Page 60
    System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. • System power LED (2- turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns
  • Asus P9X79-E WS | User Guide - Page 61
    Philips (cross) screwdriver Power supply unit Intel LGA 2011 CPU Intel LGA 2011 compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card The tools and components in the table above are not included in the motherboard package. ASUS P9X79-E WS 2-37
  • Asus P9X79-E WS | User Guide - Page 62
    Please note the order in opening/ closing the double latch. Follow the instructions printed on the metal sealing hatch or the illustrations shown below in this manual. The plastic cap will pop up automatically once the CPU is in place and the hatch properly sealed down. 1A 2 B Load lever
  • Asus P9X79-E WS | User Guide - Page 63
    5 6 Triangle mark 7 8 B A 9 B A ASUS P9X79-E WS 2-39
  • Asus P9X79-E WS | User Guide - Page 64
    2.3.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. To install the CPU heatsink and fan assembly 1 B 2 A A B 2-40 Chapter 2: Hardware information
  • Asus P9X79-E WS | User Guide - Page 65
    2.3.4 1 DIMM installation 2 3 To remove a DIMM B A ASUS P9X79-E WS 2-41
  • Asus P9X79-E WS | User Guide - Page 66
    2.3.5 1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps remain the same. 2 2-42 Chapter 2: Hardware information
  • Asus P9X79-E WS | User Guide - Page 67
    3 DO NOT overtighten the screws! Doing so can damage the motherboard. ASUS P9X79-E WS 2-43
  • Asus P9X79-E WS | User Guide - Page 68
    2.3.6 1 ATX Power connection 2 OR 2-44 Chapter 2: Hardware information
  • Asus P9X79-E WS | User Guide - Page 69
    2.3.7 1 SATA device connection OR 2 ASUS P9X79-E WS 2-45
  • Asus P9X79-E WS | User Guide - Page 70
    2.3.8 Front I/O Connector To install ASUS Q-Connector 1 2 IDE_LED+ IDE_LED- IDE_LED PWR Ground Reset Ground POWER SW RESET SW To install USB Connector To install front panel audio connector USB The actual location may vary with motherboards. AAFP 2-46 Chapter 2: Hardware information
  • Asus P9X79-E WS | User Guide - Page 71
    3, 4, 5, and 6 7. USB BIOS Flashback button 8. Optical S/PDIF Out port 9. USB 2.0 ports 7 and 8 10. External SATA 6.0 Gb/s ports 1 and 2 11. USB 2.0 ports 9 and 10 12. Audio I/O ports** *and **: Refer to the tables on the next page for LAN port and audio port definitions. ASUS P9X79-E WS 2-47
  • Asus P9X79-E WS | User Guide - Page 72
    controller limitation, USB 3.0 devices can only be used under Windows® OS environment and after the USB 3.0 driver installation. • USB 3.0 devices can only be used as OFF ORANGE GREEN Description 10 Mbps connection 100 Mbps connection 1 Gbps connection ACT/LINK SPEED LED LED LAN port **Audio 2,
  • Asus P9X79-E WS | User Guide - Page 73
    Connect to Stereo Speakers Connect to 2.1 channel Speakers Connect to 4.1 channel Speakers ASUS P9X79-E WS 2-49
  • Asus P9X79-E WS | User Guide - Page 74
    Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers 2-50 Chapter 2: Hardware information
  • Asus P9X79-E WS | User Guide - Page 75
    light starts to flash. 5. The flashing rate of the light signal accelerates along with the updating speed. Updating BIOS may have risks. If the BIOS program is damaged during the process causing the system unable to reboot, please contact the local service station for help. ASUS P9X79-E WS 2-51
  • Asus P9X79-E WS | User Guide - Page 76
    No keyboard detected One continuous beep followed by two short No memory detected beeps then a pause (repeated) One continuous beep followed At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 3. 2.5 Turning off the computer While the system is ON
  • Asus P9X79-E WS | User Guide - Page 77
    Chapter 3: BIOS setup
  • Asus P9X79-E WS | User Guide - Page 78
    provided. This chapter contains the following sections: 3.1 Knowing BIOS 3-3 3.2 BIOS setup program 3-3 3.3 Main menu 3-7 3.4 Ai Tweaker menu 3-9 3.5 Advanced menu 3-24 3.6 Monitor menu 3-35 3.7 Boot menu 3-38 3.8 Tools menu 3-42 3.9 Exit menu 3-44 3.10 Updating BIOS 3-45 ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 79
    submenus and select from the available options using a keyboard or a USB mouse. The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode. You can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ Mode/Advanced Mode screen. ASUS P9X79-E WS 3-3
  • Asus P9X79-E WS | User Guide - Page 80
    setup program Clicks to display all fan speeds if available Displays the CPU/motherboard temperature, CPU/5V/3.3V/12V voltage output, CPU/CPU_OPT/Chassis fan speed Exits the BIOS setup program without saving the changes, saves the changes and resets the system, or enters the Advanced Mode Quick
  • Asus P9X79-E WS | User Guide - Page 81
    window Scroll bar Navigation keys Menu bar The menu bar on top of the screen has the following main items: Main Ai Tweaker Advanced Monitor Boot Tool Exit For changing the basic system configuration For changing the overclocking the exit options and loading default settings ASUS P9X79-E WS 3-5
  • Asus P9X79-E WS | User Guide - Page 82
    menu bar displays the specific items for that menu. and press . Pop-up window Select a menu item and press to display a pop-up window with the configuration options for that of the menu screen are the navigation keys for the BIOS setup program. Use the navigation keys to select items
  • Asus P9X79-E WS | User Guide - Page 83
    Real Time Clock (RTC) RAM to clear the BIOS password. See section 2.2.8 Jumpers for information on how to erase the RTC RAM. • The Administrator or User Password items on top of the screen show the default Not Installed. After you set a password, these items show Installed. ASUS P9X79-E WS 3-7
  • Asus P9X79-E WS | User Guide - Page 84
    that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and press . 2. From the Create New Password box, key in
  • Asus P9X79-E WS | User Guide - Page 85
    of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display the following items: ASUS P9X79-E WS 3-9
  • Asus P9X79-E WS | User Guide - Page 86
    , choose this item to set the profiles supported by your memory modules for optimizing the system performance. The following three items appear only when you set the Ai Overclocking Tuner item to [Manual]. BCLK Frequency [XXX] Allows you to adjust the CPU and VGA frequency to enhance the system
  • Asus P9X79-E WS | User Guide - Page 87
    Allows you to manually adjust the Turbo CPU ratio. [Auto] All Turbo ratio are set by Intel CPU default settings [By BIOS. CPU CLOCKGEN FILTER [Auto] May help maximize CPU Overclocking when Enabled. Configuration options: [Auto] [Enabled] [Disabled] [10UF] Memory . ASUS P9X79-E WS 3-11
  • Asus P9X79-E WS | User Guide - Page 88
    range from 0 to 7 with 1 interval. tRWDR [Auto] Use the and keys to adjust the value. The values range from 0 to 15 with 1 interval. 3-12 Chapter 3: BIOS setup
  • Asus P9X79-E WS | User Guide - Page 89
    14 Clock] [Advance 12 Clock] [Advance 10 Clock] [Advance 8 Clock] [Advance 6 10 Clock] [Advance 8 Clock] [Advance 6 Clock] [Advance 4 Clock] [Advance 2 Clock] [Normal] [Delay 2 Clock] [Delay 4 Clock] [Delay 6 Clock] [Delay 8 Clock] [Delay 10 Clock] [Delay 12 Clock] [Delay 14 Clock] ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 90
    Clock] [Advance 10 Clock] [Advance Clock] [Delay 10 Clock] [Delay Clock] [Advance 10 Clock] [Advance Clock] [Delay 10 Clock] [Delay Clock] [Advance 10 Clock] [Advance Clock] [Delay 10 Clock] [Delay Clock] [Advance 10 Clock] [Advance Clock] [Delay 10 Clock] [Delay Clock] [Advance 10 Clock] [Advance
  • Asus P9X79-E WS | User Guide - Page 91
    14 Clock] [Advance 12 Clock] [Advance 10 Clock] [Advance 8 Clock] [Advance 6 10 Clock] [Advance 8 Clock] [Advance 6 Clock] [Advance 4 Clock] [Advance 2 Clock] [Normal] [Delay 2 Clock] [Delay 4 Clock] [Delay 6 Clock] [Delay 8 Clock] [Delay 10 Clock] [Delay 12 Clock] [Delay 14 Clock] ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 92
    ] DRAM RTL (CHD D1 R0) [Auto] Configuration options: [Auto] [Advance 14 Clock] [Advance 12 Clock] [Advance 10 Clock] [Advance 8 Clock] [Advance 6 Clock] [Advance 4 Clock] [Advance 2 Clock] [Normal] [Delay 2 Clock Slew [Auto] Configuration options: [Auto] [Normal] [More] 3-16 Chapter 3: BIOS setup
  • Asus P9X79-E WS | User Guide - Page 93
    , or to a lower value for better thermal solution. Configuration options: [Auto] [Regular] [High] [Extreme] The actual performance boost may vary depending on your CPU and DRAM specification. Do not remove the thermal module. The thermal conditions should be monitored. ASUS P9X79-E WS 3-17
  • Asus P9X79-E WS | User Guide - Page 94
    overclocking frequency range simultaneously. Configuration options: [100%] [110%] [120%] [130%] CPU should be monitored. CPU Power Phase Control CPU Command. [Optimized] Loads the ASUS optimized phase tuning profile. [Extreme] Proceeds the full phase mode. [Manual Adjustment] Allows manual
  • Asus P9X79-E WS | User Guide - Page 95
    CPU Power Phase Control item to [Manual the overclocking frequency range manual] DRAM-CD Power Phase control [Auto] [Auto] [Optimized] [Extreme] Proceeds preset phase tuning profile. Allows you to set ASUS optimized phase tuning profile. Allows you to set the Full phase mode. ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 96
    when package power exceeds Power Limit 1. Default setting is 1.25 times Power Limit 1. Intel recommends that the platform must be capable of supporting over Power Limit 2 for up to 10 msec. ASUS board can support over Power Limit 2 for a long duration. Use the and keys to adjust the
  • Asus P9X79-E WS | User Guide - Page 97
    you to set the VCCSA offset voltage. The values range from 0.005V to 0.635V with a 0.005V interval. Refer to the CPU documentation before setting the CPU voltage. Setting a high voltage may damage the CPU permanently, and setting a low voltage may make the system unstable. ASUS P9X79-E WS 3-21
  • Asus P9X79-E WS | User Guide - Page 98
    a 0.005V interval. According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may damage the CPU permanently. We recommend you install the • The values of the CPU Manual Voltage, CPU Offset Voltage, DRAM Voltage, VCCSA Voltage, VCCIO Voltage, CPU PLL Voltage, and PCH Chapter 3: BIOS setup
  • Asus P9X79-E WS | User Guide - Page 99
    . CPU Spread Spectrum [Auto] Setting to [Disabled] enhances the BCLK overclocking ability. Configuration options: [Auto] [Disabled] [Enabled] PCIE Spread Spectrum [Auto] Setting to [Disabled] enhances the PCIE overclocking ability. Configuration options: [Auto] [Disabled] [Enabled] ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 100
    3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 3-24 Chapter 3: BIOS setup
  • Asus P9X79-E WS | User Guide - Page 101
    CPU-related information that the BIOS automatically detects. The items shown in this screen may be different due to the CPU you installed. Scroll down to display the following items: Intel for Windows XP and Linux (OS optimized for Hyper-Threading Technology). ASUS P9X79-E WS 3-25
  • Asus P9X79-E WS | User Guide - Page 102
    to boot even without support for CPUs with extended CPUID functions. Disables this function (for Windows XP). Execute Disable Bit [Enabled] [Enabled] [Disabled] Enables the No-Execution Page Protection Technology. Forces the XD feature flag to always return to zero (0). Intel Virtualization Tech
  • Asus P9X79-E WS | User Guide - Page 103
    CPU C6 report to OS. CPU C7 Report [Auto] Allows you to disable or enable the CPU C7 report to OS. 3.5.2 System Agent Configuration Intel (R) VT-d [Disabled] Allows you to enable virtualization technology function on memory speed. Configuration options: [GEN1] [GEN2] [GEN3] ASUS P9X79-E WS 3-27
  • Asus P9X79-E WS | User Guide - Page 104
    [Enabled] Allows you to enable or disable the High Precision Event Timer. Configuration options: [Disabled] [Enabled] 3.5.4 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the
  • Asus P9X79-E WS | User Guide - Page 105
    Plug Support. Configuration options: [Disabled] [Enabled]. SATA6G_4 (Blue) Hot Plug [Disabled] This item appears only when you set the previous item to [AHCI Mode] and [RAID mode]. It allows users to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled]. ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 106
    previous item to [AHCI Mode] and [RAID mode]. It allows users to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled]. SATA6G_6 (Blue) Hot Plug [Disabled] This item appear only when you this menu allow you to change the USB-related features. 3-30 Chapter 3: BIOS setup
  • Asus P9X79-E WS | User Guide - Page 107
    ] •[Disabled] Disables the function. •[Enabled] Enables the support for USB 3.0 devices on legacy operating systems (OS). EHCI Hand-off [Disabled] •[Disabled] Disables the function. •[Enabled] Enables the support for operating systems without an EHCI hand‑off feature. ASUS P9X79-E WS 3-31
  • Asus P9X79-E WS | User Guide - Page 108
    mode to legacy AC97 or highdefinition audio depending on the audio standard that the front panel audio module supports. •[HD] Sets the front panel audio connector (AAFP) mode to high definition audio. •[AC97] output. •[HDMI] Sets to [HDMI] for HDMI audio output. 3-32 Chapter 3: BIOS setup
  • Asus P9X79-E WS | User Guide - Page 109
    item to [Enabled] and allows you to enable or disable the LAN2 PXE OptionRom of the Intel LAN controller. Configuration options: [Disabled] [Enabled] VIA 1394 Controller [Enabled] This item allows user : [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] ASUS P9X79-E WS 3-33
  • Asus P9X79-E WS | User Guide - Page 110
    . When set to Enabled, all other PME options will be switched off. Configuration options: [Disabled] [Enabled in S5] [Enabled in S4 and S5] 3-34 Chapter 3: BIOS setup
  • Asus P9X79-E WS | User Guide - Page 111
    settings. Scroll down to display the following items: CPU Temperature / MB Temperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignore if you do not wish to display the detected temperatures. ASUS P9X79-E WS 3-35
  • Asus P9X79-E WS | User Guide - Page 112
    Speed [xxxx RPM] or [Ignore] / [N/A] The onboard hardware monitor automatically detects and displays the CPU, CPU OPT, and chassis fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A. Select Ignore if you do not wish to display the detected
  • Asus P9X79-E WS | User Guide - Page 113
    automatically detects the voltage output through the onboard voltage regulators. Select Ignore if you do not want to detect this item. Anti Surge Support [Enabled] This item allows you to enable or disable the Anti Surge function. Configuration options: [Disabled] [Enabled] ASUS P9X79-E WS 3-37
  • Asus P9X79-E WS | User Guide - Page 114
    normal boot. The following four items appear when you set Fast Boot to [Enabled]. USB Support [Partial Initialization] [Disabled] [Full Initialization] [Partial Initialization] All USB devices will not be ports with keyboard and mouse connections will be detected. 3-38 Chapter 3: BIOS setup
  • Asus P9X79-E WS | User Guide - Page 115
    occurs. Option ROM Messages [Force BIOS] [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence. [Keep Current] The third-party ROM messages will be displayed only if the third-party manufacturer had set the add-on device to do so. ASUS P9X79-E WS 3-39
  • Asus P9X79-E WS | User Guide - Page 116
    BIOS setup program. CSM (Compatibility Support Module) Allows you to configure the CSM (Compatibility Support Module) items to fully support support the non- UEFI driver add-on devices or the Windows® UEFI mode. Disable the CSM to fully support the non-UEFI driver add-on devices or the Windows
  • Asus P9X79-E WS | User Guide - Page 117
    you to load the downloaded PK from a USB storage device. The PK file must be formatted as a UEFI variable structure with time-based authenticated variable. ASUS P9X79-E WS 3-41
  • Asus P9X79-E WS | User Guide - Page 118
    you to run ASUS EZ Flash 2 Utility to update BIOS. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more details, refer to section 3.10.2 ASUS EZ Flash 2 utility. 3.8.2 ASUS DRAM SPD
  • Asus P9X79-E WS | User Guide - Page 119
    keys to adjust the number. Press , and then select Yes. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/CPU configuration and BIOS version. ASUS P9X79-E WS 3-43
  • Asus P9X79-E WS | User Guide - Page 120
    BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Exit Load Optimized Defaults Save Changes & Reset Discard Changes & Exit ASUS , a confirmation window appears. Select Yes to discard changes and exit. ASUS EZ Mode This option allows
  • Asus P9X79-E WS | User Guide - Page 121
    Internet Service Provider (ISP). Launching ASUS Update After installing AI Suite II from the motherboard support DVD, launch ASUS Update by clicking Update > ASUS Update on the AI Suite II main menu bar. Quit all Windows® applications before you update the BIOS using this utility. ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 122
    Updating the BIOS through the Internet To update the BIOS through the Internet: 1. From the ASUS Update screen, select Update BIOS from Internet, and then click Next. 2. Select the ASUS FTP site nearest you to avoid network traffic. If you want to enable the BIOS downgradable function and auto BIOS
  • Asus P9X79-E WS | User Guide - Page 123
    instructions to complete the update process. • The screenshots in this section are for reference only. The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 124
    3.10.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a bootable floppy disk or an OS‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1.
  • Asus P9X79-E WS | User Guide - Page 125
    Menu for details. 3.10.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB
  • Asus P9X79-E WS | User Guide - Page 126
    displays may not be same as shown. Before updating BIOS 1. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition. 2. Download the latest BIOS file and BIOS Updater from the ASUS website at http:// support.asus.com and save them on the USB flash drive
  • Asus P9X79-E WS | User Guide - Page 127
    any key to return to the DOS prompt. ASUSTek BIOS Updater for DOS V1.18 [2011/04/29] Current CAP BOARD: P9X79-E WS VER: 0220 DATE: 08/09/2011 PATH: A:\ Update CAP BOARD: Unknown VER: Unknown DATE: Unknown BIOS backup is done! Press any key to continue. Note Saving BIOS: ASUS P9X79-E WS 3-51
  • Asus P9X79-E WS | User Guide - Page 128
    BIOS file To update the BIOS file using BIOS Updater 1. At the FreeDOS prompt, type bupdater /pc /g and press . D:\>bupdater /pc /g 2. The BIOS Updater screen appears as below. ASUSTek BIOS Updater for DOS V1.18 [2011/04/29] Current CAP BOARD: P9X79-E WS VER: 0220 DATE: 08/09/2011 Update
  • Asus P9X79-E WS | User Guide - Page 129
    Chapter 4: Software support
  • Asus P9X79-E WS | User Guide - Page 130
    describes the contents of the support DVD that comes with the motherboard package and the software. This chapter contains the following sections: 4.1 Installing an operating system 4-3 4.2 Support DVD information 4-3 4.3 Software information 4-5 4.4 RAID configurations 4-25 ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 131
    to display the ASUS contact information. Click an icon to display DVD/ motherboard information If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the DVD. ASUS P9X79-E WS 4-3
  • Asus P9X79-E WS | User Guide - Page 132
    support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening the files. 1. Click on the Manual tab. Click on ASUS Motherboard Utility Guide
  • Asus P9X79-E WS | User Guide - Page 133
    Click to update the motherboard BIOS Click to monitor sensors or CPU frequency Click to select a utility • The Auto Tuning button appears only on models with the TurboV EVO function. • The applications in the Tool menu vary with models. • The screeshots of ASUS AI Suite II in this user manual are
  • Asus P9X79-E WS | User Guide - Page 134
    system's overall performance. Launching ASUS SSD Caching II To launch ASUS SSD Caching, click Tool > ASUS SSD Caching II on the SDD port indicators Configuring ASUS SSD Caching II 1. Connect at least one HDD and SSDs to the the Marvell® SATA ports. ASUS SSD Caching automatically detects the HDD and
  • Asus P9X79-E WS | User Guide - Page 135
    completed. • For regular usage, the SATA6G_E12/E34 connectors are recommended for data drives. • After disabling SSD Caching, the SSD will become a non-configurable disk in Windows OS. To use the SSD again for normal functions, go to Disk Management to reconfigure the SSD. ASUS P9X79-E WS 4-7
  • Asus P9X79-E WS | User Guide - Page 136
    1.1* mobile devices on your computer's USB port three times faster than the standard USB devices**. • * Check your manufacturer if your USB device is a Battery Charging Specification 1.1 (BC 1.1) compliant or compatible device. • ** Actual charging speeds may vary depending on the charging rate and
  • Asus P9X79-E WS | User Guide - Page 137
    II from the motherboard support DVD, launch ASUS Update by clicking Update> ASUS Update on the AI Suite II main menu bar. Using ASUS Update Select the way you would like to do with the BIOS utility. Click on Next and follow the instructions to complete your request. • Update BIOS from Internet
  • Asus P9X79-E WS | User Guide - Page 138
    6 7 4-10 Function description CPU Load-line Calibration It allows you to adjust the voltage settings and control the system temperature. Higher load-line calibration could get higher voltage and good overclocking performance but increases the CPU and VRM thermal. CPU Current Capability CPU Current
  • Asus P9X79-E WS | User Guide - Page 139
    extends the overclocking frequency range ASUS optimized phase tuning profile to increase DRAM power efficiency. • The actual performance boost may vary depending on your CPU specification. • Do not remove the thermal module. The thermal conditions should be monitored. ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 140
    settings like CPU frequency, GPU frequency, vCore Voltage, and Fan Control. Launching EPU After installing AI Suite II from the motherboard support DVD, launch Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. 4-12 Chapter
  • Asus P9X79-E WS | User Guide - Page 141
    . • Turbo: maximizes the fan speed for the best cooling effect. • User: Allows you to configure the CPU fan profile under certain limitations. Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P9X79-E WS 4-13
  • Asus P9X79-E WS | User Guide - Page 142
    ASUS Update After installing AI Suite II from the motherboard support DVD, launch MyLogo by clicking Update> MyLogo on the AI Suite II main menu bar. Using MyLogo Select the way you would like to do update your boot logo. Then click Next and follow the given instructions. Change the BIOS boot
  • Asus P9X79-E WS | User Guide - Page 143
    . 2. Then at Picture File, Browse to select the desired image for boot logo. Click Next. 3. Follow steps 2-5 in Change the BIOS boot logo of my motherboard to complete logo update. The fullscreen logo application in BIOS utility must be enabled for MyLogo to take effect. ASUS P9X79-E WS 4-15
  • Asus P9X79-E WS | User Guide - Page 144
    of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility, you are assured that your computer is always at a healthy operating condition. Launching Probe II After installing AI Suite II from the motherboard support DVD
  • Asus P9X79-E WS | User Guide - Page 145
    4.3.10 TurboV EVO ASUS TurboV EVO introduces TurboV that allows you to manually adjust the CPU frequency and related voltages as well as Auto Tuning function that offers automatic and easy overclocking and system level up. After installing AI Suite II from the motherboard support DVD, launch TurboV
  • Asus P9X79-E WS | User Guide - Page 146
    immediately • Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Ratio function in TurboV. Refer to Chapter 3 of your motherboard user manual for details. • The CPU Ratio bars show the status of the CPU cores, which vary with your CPU model. 4-18 Chapter 4: Software support
  • Asus P9X79-E WS | User Guide - Page 147
    environment is strongly recommended. • Fast Tuning: fast CPU overclocking • Extreme Tuning: extreme overclocking for CPU and memory Using Fast Tuning 1. Click the Auto Tuning tab and then click Fast. 2. Read through the warning messages and click OK to start auto-overclocking. ASUS P9X79-E WS 4-19
  • Asus P9X79-E WS | User Guide - Page 148
    . 2. Read through the warning messages and click OK to start auto-overclocking. 3. TurboV automatically overclocks the CPU and memory and restarts the system. After re-entering Windows, a message appears indicating the current overclocking result. To keep the result, click Stop. 4. If you did not
  • Asus P9X79-E WS | User Guide - Page 149
    II from the motherboard support DVD, launch supported by the connected device). 3. You can manually switch the USB 3.0 mode back to Normal mode at any time. Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 150
    ultimate audio experience on your computer. The software provides Jack-Sensing function, S/PDIF Out support ® Audio Driver from the support DVD that came with the motherboard package. window Information button Refer to the software manual in the support DVD or visit the ASUS website at www.asus
  • Asus P9X79-E WS | User Guide - Page 151
    install Dr. Power on your computer: 1. Place the support DVD in the optical drive. The setup window will be displayed if Autorun is enabled on your system. 2. Click the Drivers tab and then click ASUS Dr. Power. 3. Follow the instructions to complete installation. Using Dr. Power After you complete
  • Asus P9X79-E WS | User Guide - Page 152
    or until you click the Close button. ASUS Dr. Power will notify you of the power status if the same conditions are present on your system. ASUS Dr. Power can be configured to provide notifications at regular intervals: • 15 minutes
  • Asus P9X79-E WS | User Guide - Page 153
    4.4 RAID configurations The motherboard supports the following SATA RAID solutions: • Intel® Rapid Storage Technology with RAID 0, RAID 1, RAID 10 and RAID 5 support. • Mavell® RAID utility with RAID 0 and RAID 1 support. • You must install Windows® XP Service Pack 3 or later versions before using
  • Asus P9X79-E WS | User Guide - Page 154
    motherboard supports , and then exit the BIOS Setup. Refer to Chapter 3 for details on entering and navigating through the BIOS Setup. Due to chipset limitation utility main menu. Intel(R) Rapid Storage Technology - Option ROM - v10.0.0.1032 Copyright(C) 2003-10 Intel Corporation. All Rights
  • Asus P9X79-E WS | User Guide - Page 155
    BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.0.0.1032 Copyright(C) 2003-10 Intel Corporation. All Done ASUS P9X79-E WS 4-27
  • Asus P9X79-E WS | User Guide - Page 156
    selection. 6. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 and 5 only),and then press . The available stripe size values range from 4KB to 128KB. The following are menu, or to go back to the CREATE VOLUME menu. 4-28 Chapter 4: Software support
  • Asus P9X79-E WS | User Guide - Page 157
    and press . The following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.0.0.1032 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ DELETE VOLUME to exit? (Y/N): 2. Press to exit or press to return to the utility main menu. ASUS P9X79-E WS 4-29
  • Asus P9X79-E WS | User Guide - Page 158
    using two SATA hard disk drives. Refer to Chapter 2 of your motherboard user manual for the exact location of the Marvell SATA 6.0 Gb/s connector. BIOS Version : 1.0.0.1028 Firmware Version: 2.2.0.1105 PCIe Speed Rate : 5.0Gbps Configure SATA as: AHCI Mode ▶ ▶ Help Marvell RAID on chip
  • Asus P9X79-E WS | User Guide - Page 159
    Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd. Configure->Select free disksCreate Virtual and documents. Configuration options: [32K] [64K] Name: Enter a name with 1-10 letters (no special characters) for the RAID array. 5. Move the selection bar in the image below. ASUS P9X79-E WS 4-31
  • Asus P9X79-E WS | User Guide - Page 160
    RAID on chip controller. ENTER: Operation F10: Exit/Save ESC: Return 6. Press . The following warning message appears: Exit Do you want to exit from Marvell BIOS Setup? Yes selected virtual disk. ENTER: Operation F10: Exit/Save ESC: Return 4-32 Chapter 4: Software support
  • Asus P9X79-E WS | User Guide - Page 161
    the Master Boot Record (MBR) from the selected RAID array. 3. Press . The following warning message appears: Exit Do you want to exit from Marvell BIOS Setup? Yes No Press to save the RAID setting and exit the Marvell RAID utility. ASUS P9X79-E WS 4-33
  • Asus P9X79-E WS | User Guide - Page 162
    4-34 Chapter 4: Software support
  • Asus P9X79-E WS | User Guide - Page 163
    Chapter 5: Multiple GPU technology support
  • Asus P9X79-E WS | User Guide - Page 164
    Chapter summary 5 This chapter describes the motherboard features and the new technologies it supports. This chapter contains the following sections: 5.1 ATI® CrossFireX™ technology 5-3 5.2 NVIDIA® SLI™ technology 5-9 5.3 NVIDIA® CUDA™ technology 5-15 ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 165
    . 2. For Windows XP, go to Control Panel > Add/Remove Programs. For Windows Vista, go to Control Panel > Programs and Features. 3. Select your current graphics card driver/s. 4. For Windows XP, select Add/Remove. For Windows Vista, select Uninstall. 5. Turn off your computer. ASUS P9X79-E WS 5-3
  • Asus P9X79-E WS | User Guide - Page 166
    the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi- bridge (bundled with graphics cards) Goldfingers 5-4 Chapter 5: Multiple GPU technology support
  • Asus P9X79-E WS | User Guide - Page 167
    the three graphics card into the PCIEX16 slots. If your motherboard has more than three PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi cards separately. 6. Connect a VGA or a DVI cable to the graphics card. ASUS P9X79-E WS 5-5
  • Asus P9X79-E WS | User Guide - Page 168
    2. Insert the four graphics card into the PCIEX16 slots. Refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. 3. Ensure that the a VGA or a DVI cable to the graphics card. 5-6 Chapter 5: Multiple GPU technology support
  • Asus P9X79-E WS | User Guide - Page 169
    in Windows environment. Launching the AMD Catalyst Control Center To launch the AMD Catalyst Control Center: 1. Right-click on the Windows® desktop and select Catalyst Control Center. 2. Click Catalyst Control Center to configure the displays and settings of your AMD graphic cards. ASUS P9X79-E WS
  • Asus P9X79-E WS | User Guide - Page 170
    technology 1. In the Catalyst Control Center window, click Performance > AMD CrossFireXTM. 2. Select Enable CrossFireXTM. 3. Select a GPU combination from the drop-down list. 4. Click Apply to save and activate the GPU settings made. 2 1 3 4 5-8 Chapter 5: Multiple GPU technology support
  • Asus P9X79-E WS | User Guide - Page 171
    additional chassis fans for better thermal environment. • The NVIDIA Triple SLI technology is supported by Windows® Vista™ operating system only. • Visit the NVIDIA zone website at http://www.nzone.com for the latest certified graphics card and supported 3D application list. ASUS P9X79-E WS 5-9
  • Asus P9X79-E WS | User Guide - Page 172
    two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for a DVI cable to the graphics card. SLI bridge Goldfingers 5-10 Chapter 5: Multiple GPU technology support
  • Asus P9X79-E WS | User Guide - Page 173
    the three graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics Connect a VGA or a DVI cable to the graphics card. 3-Way SLI bridge ASUS P9X79-E WS 5-11
  • Asus P9X79-E WS | User Guide - Page 174
    the four graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi- cable to the graphics card. 4-Way SLI bridge 5-12 Chapter 5: Multiple GPU technology support
  • Asus P9X79-E WS | User Guide - Page 175
    space of the Windows® desktop and select NVIDIA Control Panel. The NVIDIA Control Panel window appears (See Step B3). B1. If you cannot see the NVIDIA Control Panel item in step (A), select Screen Resolution. B2. From the Screen Resolution window, click Advanced settings. ASUS P9X79-E WS 5-13
  • Asus P9X79-E WS | User Guide - Page 176
    window appears. Enabling SLI settings From the NVIDIA Control Panel window, select Configure SLI, Surround, PhysX. In the Quad-SLI enabled, click Maximize 3D Performance SLI to set the display for viewing SLI rendered content. When done, click Apply. 5-14 Chapter 5: Multiple GPU technology support
  • Asus P9X79-E WS | User Guide - Page 177
    cards and the motherboard layout may vary with models, but the general installation steps remain the same. 1. Insert four Tesla computing processor card(s) into the PCIe x16_1, PCIe x16_3, PCIe x16_5, and PCIe x16_7 slot. Ensure that the cards are properly seated on the slot. ASUS P9X79-E WS 5-15
  • Asus P9X79-E WS | User Guide - Page 178
    to the documentation that came with your graphics card package to install the device drivers. 5. To verify graphics card driver installation, right-click My Computer and select Properties from the menu. Click based on the components you installed. 5-16 Chapter 5: Multiple GPU technology support
  • Asus P9X79-E WS | User Guide - Page 179
    CA 94539, USA Telephone +1-812-282-3777 Fax +1-510-608-4555 Web site usa.asus.com Technical Support Telephone Support fax Online support +1-812-282-2787 +1-812-284-0883 support.asus.com ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany
  • Asus P9X79-E WS | User Guide - Page 180
    1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont, CA 94539. Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Number : P9X79-E WS Conforms to the following specifications: FCC Part 15, Subpart
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
Motherboard
P9X79-E
WS