Asus PRL-DLS533 User Guide - Page 152
Creating a Diskette, Installing the Driver, Line Speed
View all Asus PRL-DLS533 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
5.6.2 Broadcom Gigabit LAN Driver Installation NT4 W2K You can find the Broadcom Gigabit Network driver for SCO OpenServer WXP 5.0.6a in the ASUS Support CD at \Drivers\Lan\Broadcom\SCO\OpenSrv\ NNW SCO Creating a Diskette UNX LNX 1. Copy the file VOL.000.000 to an SCO system. The file is located in "\drivers\lan\broadcom\sco\opensrv" of the ASUS Support CD. 2. Create a diskette using: dd if =VOL.000.000 of=/dev/rfd0135ds18. Installing the Driver 1. Use custom or scoadmin software to install the SCO OpenServer driver from the media image or from the floppy created above. 2. After the package is installed, use netconfig to add the new network adapter. 3. Once added, modify the hardware configuration in Advanced Options to change the Line Speed and Flow Control if desired. The settings for these parameters are listed below: Line Speed • AutoNegotiate (default) (all speeds advertised) • Fixed HalfDuplex10 • Auto HalfDuplex10 (only 10 Mbps half duplex advertised) • Fixed FullDuplex10 • Auto FullDuplex10 (only 10 Mbps full duplex advertised) • Fixed HalfDuplex100 • Auto HalfDuplex100 (only 100 Mbps half duplex advertised) • Fixed FullDuplex100 • Auto FullDuplex100 (only 100 Mbps full duplex advertised) • Auto HalfDuplex1000 (only 1000 Mbps half duplex advertised) • Fixed FullDuplex1000 (Note 1) • Auto FullDuplex1000 (only 1000 Mbps full duplex advertised) NOTE: 1000 Mbps (1 Gbps) full duplex fixed speed is only valid for fiber connections. For copper, twisted-pair connections, 1 Gbps can only be set through autonegotiation with a 1 Gbps partner. Intel Gigabit LAN does not support SCO UNIX 5.0.6a because Intel did not release the driver. ASUS PRL-DLS533 motherboard user guide 5-49