Asus PRL-DLS533 User Guide - Page 43
Jumpers
![]() |
View all Asus PRL-DLS533 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2.7.2 Jumpers 1. SCSI setting (2-pin JSCI1) This jumper allows you to enable or disable the onboard SCSI feature. Keep the jumper open if you wish to install SCSI devices. Place a cap on the jumper to disable the onboard SCSI controller. PRL-DLS533 ® JSCSI1 32 21 Disable PRL-DLS533 LSI 1030 SCSI Chip Setting Enable (Default) 2. 32-bit PCI Gigabit Ethernet setting (1 x 3-pin JLAN1) These jumpers are set by default, pins [1-2], to enable the onboard INTEL 82540 Gigabit Ethernet controller to support 10/100/1000BASE networks. Set to pins 2-3 to disable the controller. PRL-DLS533 ® JLAN1 32 21 Disable Enable (Default) PRL-DLS533 Intel 82540 LAN Chip Setting 2-16 Chapter 2: Hardware information
![](/manual_guide/products/asus-prldls533-user-guide-3d457a6/43.png)
2-16
Chapter 2: Hardware information
2.
32-bit PCI Gigabit Ethernet setting (1 x 3-pin JLAN1)
These jumpers are set by default, pins [1-2], to enable the onboard
INTEL 82540 Gigabit Ethernet controller to support 10/100/1000BASE
networks.
Set to pins 2-3 to disable the controller.
PRL-DLS533
PRL-DLS533 Intel 82540 LAN Chip Setting
(Default)
Enable
Disable
3
2
1
2
JLAN1
1.
SCSI setting (2-pin JSCI1)
This jumper allows you to enable or disable the onboard SCSI feature.
Keep the jumper open if you wish to install SCSI devices. Place a cap
on the jumper to disable the onboard SCSI controller.
PRL-DLS533
PRL-DLS533 LSI 1030 SCSI Chip Setting
JSCSI1
(Default)
Enable
Disable
3
2
1
2
2.7.2
Jumpers