Asus RAMPAGE IV BLACK EDITION AC4 RAMPAGE IV BLACK EDITION User's Manual - Page 84

2.4 OC Panel The OC Panel is a device that allows you to perform overclocking without the need to go to the BIOS settings or use software utilities. You can setup the OC Panel in an available 5.25inch drive bay on your computer chassis (Normal Mode) or as an external handheld console on an "open-air" OC test bench (Extreme Mode.) These modes are further explained in the succeeding subsections. 2.4.1 • Ensure that your system has adequate cooling designed for overclocking before using the OC Panel. • Ensure to update your OC Panel's firmware. Visit www.asus.com for the latest firmware and updates about the OC Panel. • Ensure that you have installed ROG Connect Plus driver for the NORMAL Mode of the OC Panel. • When updating the OC Panel firmware, you have to disable the USB XHCI function in BIOS. To do this, click Advanced > USB Configuration > Intel xHCI Mode then set Intel xHCI Mode to [Disabled]. OC Panel Overview Normal/Extreme Mode Switch CPU Level Up OC LCM Power Button FanSpeed Control button OC Start Button Value up Button Left Arrow button Clear button Fan connectors 1,2 VGA hotwire connectors VGA hotwire Start OK Clear Reset ON ON OFF OFF OK button Right Arrow button Reset button Value Down button Fan connectors 3,4 Pause/Slow Mode Start Subzero Sense connector OK Clear Reset Chapter 2 OC Panel cover 2-18 Chapter 2: Basic Installation