Asus RAMPAGE V EXTREME U3.1 User Guide

Asus RAMPAGE V EXTREME U3.1 Manual

Get Asus RAMPAGE V EXTREME U3.1 PDF manuals and user guides View all Asus RAMPAGE V EXTREME U3.1 manuals
Add to My Manuals
Save this manual to your list of manuals

Asus RAMPAGE V EXTREME U3.1 manual content summary:

  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 1
    Motherboard RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 2
    service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL from http://support.asus.com/download problems
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 3
    ...vii About this guide...viii RAMPAGE V EXTREME specifications summary x OC Panel specifications summary xv Package contents...xvi Installation tools and components xvii Chapter 1: Product Introduction 1.1 Special features 1-1 1.1.1 Product highlights 1-1 1.1.2 ROG Unique Gaming Features
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 4
    Network Stack Configuration 3-42 3.6.10 ROG Effects 3-42 3.7 Monitor menu 3-43 3.8 Boot menu 3-47 3.9 Tool menu 3-53 3.10 Exit menu 3-55 3.11 Updating BIOS 3-56 3.11.1 EZ Update 3-56 3.11.2 ASUS EZ Flash 2 3-57 3.11.3 ASUS CrashFree BIOS 3 3-58 3.11.4 ASUS BIOS Updater 3-59 iv
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 5
    4-18 System Information 4-19 USB BIOS Flashback 4-21 USB Charger 4-22 Push Notice 4-23 Ai Charger 4-26 Wi-Fi Engine 4-27 Wi-Fi GO! and Remote GO 4-29 ASUS Media Streamer 4-39 4.6 ROG Audio features 4-41 Sonic Studio 4-41 Sonic SenseAmp 4-43 Sonic SoundStage 4-45 DTS Connect
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 6
    5: RAID support 5.1 RAID configurations 5-1 5.1.1 RAID definitions 5-1 5.1.2 Installing Serial ATA hard disks 5-2 5.1.3 Setting the RAID item in BIOS 5-2 5.1.4 Intel® Rapid Storage Technology Option ROM utility 5-3 5.2 Creating a RAID driver disk 5-8 5.2.1 Creating a RAID driver disk
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 7
    supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package. • Before using the product, ensure all cables are
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 8
    with the motherboard package and the software. 5. Chapter 5: RAID support This chapter describes the RAID configurations. Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS website The ASUS website (www.asus.com
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 9
    note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 10
    RAMPAGE V EXTREME specifications summary CPU Chipset Memory Expansion Slots Multi-GPU Technology Storage x New Intel® Core™ i7 Processors on LGA 2011-v3 socket Supports 22nm CPU Supports Intel® Turbo Boost Technology 2.0* *The support of these features depends on the CPU types. Intel® X99 Express
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 11
    RAMPAGE V EXTREME specifications summary LAN Wireless / Bluetooth SupremeFX High Definition Audio USB Back Panel I/O Ports Intel® I218-V Gigabit LAN- Dual interconnect between the integrated Media Access Controller (MAC) and physical layer (PHY) Anti-surge LANGuard ROG GameFirst III Wi-Fi 802.11
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 12
    RAMPAGE V EXTREME specifications summary Internal I/O Connectors Form Factor BIOS Features Manageability 2 x USB 3.0 connectors support additional 4 USB 3.0 ports 2 x USB 2.0 connectors support additional 4 USB 2.0 ports [one connector via ROG_EXT header] 2 x SATA Express (compatible with 4 SATA
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 13
    RAMPAGE V EXTREME specifications summary Software Drivers ROG GameFirst III ROG RAMDisk ROG CPU-Z ROG Mem TweakIt Kaspersky® Anti-Virus DAEMON Tools Pro Standard ASUS WebStorage HomeCloud ASUS Utilities Operating Systems Support Windows® 8.1 / Windows® 8 / Windows® 7 ROG Exclusive Features
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 14
    tablet, supporting iOS 7 & Android 4.0 systems ASUS Exclusive Features: - AI Suite 3 - USB 3.0 Boost - USB Charger+ - AI Charger+ - Push Notice - Disk Unlocker ASUS EZ DIY - USB BIOS Flashback - ASUS CrashFree BIOS 3 - ASUS EZ Flash 2 - ASUS C.P.R.(CPU Parameter Recall) - MemOK! ASUS Q-Design - ASUS
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 15
    1 x SATA power cable from system power supply RAMPAGE V EXTREME and other motherboards with ROG_EXT port * Visit the ASUS website at www.asus.com for the latest motherboard support/compatibility lists. ** Install the latest utility/firmware (ROG Connect Plus) for better compatibility. xv
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 16
    Package contents Check your motherboard package for the following items. Motherboard Cables Accessories Application DVD Documentation ROG RAMPAGE V EXTREME 1 x 3-in-1 thermistor cables 5 x 2-in-1 SATA 6.0 Gb/s signal cables 1 x SLI® cable 1 x CrossFireXTM cable I/O Shield 1 x ASUS 3T3R dual band
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 17
    Philips (cross) screwdriver PC chassis Power supply unit Intel LGA 2011-3 CPU Intel LGA 2011-3 compatible CPU Fan DDR4 DIMM SATA hard disk drive Graphics card SATA optical disc drive (optional) The tools and components in the table above are not included in the motherboard package. xvii
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 18
    xviii
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 19
    . Functions are available when using PCIe 3.0-compliant devices. Refer to www.asus.com for updated details. 3-Way/4-way/Quad-GPU SLI™ and CrossFireX™ Support This motherboard features Intel's powerful new X99 platform and optimizes PCIe allocation in multi-GPU SLI and CrossFireX solutions to
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 20
    motherboard that is in keeping with the ROG audio. ROG GameFirst III ASUS GameFirst III manually allocate bandwidth and adjust priority settings of each application to run more quickly and smoothly. Intel® Gigabit LAN This LAN solution from Intel features high TCP and UDP throughput with lower CPU
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 21
    the motherboard will do the rest. ROG Connect ROG Connect allows you to monitor the status of your desktop PC and tweak its parameters in real-time via a notebook. ROG Connect to wake up in CPU Level UP, XMP, or directly to BIOS. This feature supports USB keyboards only. ASUS RAMPAGE V EXTREME 1-3
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 22
    extreme conditions. With GPU.DIMM Post, you can quickly and easily check your graphic cards and memory modules' statuses in the BIOS as well as overclocking settings. BIOS Print ROG offers a whole new UEFI BIOS feature to handle the demands of an overclocking experience. The motherboard features ROG
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 23
    the BIOS file, press the BIOS Flashback button for three seconds, and the UEFI BIOS is automatically updated even without entering the existing BIOS or operating system. It also allows you to regularly check for UEFI BIOS updates and download the latest BIOS automatically. ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 24
    quickly view information about your system's main components. It gives current information and status of the CPU, motherboard, memory, and other main components. Styled consistently with the ROG style, show off your PC specifications with pride. MemTweakIt MemTweakIt is a DRAM efficiency tool that
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 25
    Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before to do so may cause severe damage to the motherboard, peripherals, or components. ASUS RAMPAGE V EXTREME 1-7
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 26
    Chapter 1 1.2.2 Motherboard layout Refer to the Internal connectors and the Rear I/O Connection section on Chapter 2 for more information about the internal connectors and rear panel connectors. 1-8 Chapter 1: Product introduction
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 27
    ) 27 TPM connector (20-1 pin TPM) 28 Front panel audio connector (10-1 pin AAFP) 29 ROG Logo LED connector (3-pin) Page 1-11 1-10 1-42 1-37 1-25 1-38 1-28 1-21 1-34 1-21 1-26 1-24 1-23 1-22 1-45 1-37 1-41 1-35 1-36 1-25 1-23 1-43 1-41 1-38 1-36 1-24 1-40 1-40 1-44 ASUS RAMPAGE V EXTREME 1-9
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 28
    for the LGA 2011-v3 socket. Ensure that all power cables are unplugged before installing the CPU. • Upon purchase of the motherboard, ensure that the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA2011-v3 socket
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 29
    memory The motherboard comes with eight Double Data Rate 4 (DDR4) Dual Inline Memory Module (DIMM) slots. A DDR4 module is notched differently from a DDR3 or DDR2 module. DO NOT install a DDR3 or DDR2 memory module to the DDR4 slot. Recommended memory configurations ASUS RAMPAGE V EXTREME 1-11
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 30
    channel operation. • According to Intel® CPU spec, DIMM voltage below 1.65V is recommended to protect the CPU. • Always install DIMMs with the the Extreme Tweaker menu section for manual memory frequency adjustment. • For system stability, use a more efficient memory cooling system to support a
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 31
    RAMPAGE V EXTREME Motherboard Qualified Vendors List (QVL) DDR4 3300 MHz capability Vendors Part No. G.SKILL F4-3300C17Q-16GRR Size SS/ DS 16GB(4x4GB) SS Chip Brand Chip NO. Gskill NA Timing Voltage DIMM socket support • • • • • • • • • • • • • • ASUS RAMPAGE V EXTREME 1-13
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 32
    -16-35 14-16-16-35 15-17-17-36 15-17-17-36 Voltage 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V DIMM socket support (Optional) 2 4 8 • • • • • • • • • • • • • • • • 1-14 Chapter 1: Product introduction
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 33
    1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V DIMM socket support (Optional) 2 4 8 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • ASUS RAMPAGE V EXTREME 1-15
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 34
    2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V 1.2V DIMM socket support (Optional) 2 48 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • (Continued on the next page) 1-16 Chapter 1: Product
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 35
    . • ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. ASUS RAMPAGE V EXTREME 1-17
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 36
    Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description 1 PCIe 3.0 x16_1 slot 2 PCIe 3.0 x8_2 slot 3 PCIe 2.0 x4_1 slot 4 PCIe 3.0 x16/8_3 slot 5 PCIe 2.0 x1_1 slot 6 PCIe
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 37
    - 3-way SLI/CFX x16 x8 x8 - 4-way SLI/CFX x16 x8 x8 x8 PCIe 3.0 operating mode for 28 lanes CPU Red PCIe slot PCIE_X16_1 PCIE_X8_2 PCIE_X16/X8_3 Single VGA x16 - - SLI/CFX x16 - x8 3-way SLI/ CFX x8 x8 , USB3_E910 ports, and the PCIE_X1_1 slot will be disabled. ASUS RAMPAGE V EXTREME 1-19
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 38
    Chapter 1 IRQ assignments for this motherboard PCIE_X16_1 PCIE_X8_2 PCIE_x4_1 PCIE_X16/X8_3 PCIE_X8_4 PCIE_X1_1 Intel LAN controller SATA #0 SATA #1 HD Audio EHCI #0 (USB 2.0) EHCI #1 (USB 2.0) XHCI (USB 3.0) A shared shared shared shared shared - B
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 39
    who continually change settings to enhance system performance. 1. Power-on (START) button The motherboard comes with a power-on button that allows you to power up or wake up any motherboard component. 2. Reset button Press the Reset button to reboot the system. ASUS RAMPAGE V EXTREME 1-21
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 40
    the motherboard may Qualified Vendors Lists) in this user manual or at www.asus.com. BIOS default settings. A message will appear during POST to remind you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from www.asus
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 41
    to be retried in quick succession to achieve a successful POST. 5. BIOS Switch button (BIOS_SWITCH) The motherboard comes with two BIOS. Press the BIOS button to switch BIOS and load different BIOS settings. The nearby BIOS LEDs indicate the currently selected BIOS. ASUS RAMPAGE V EXTREME 1-23
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 42
    Boot button (SAFE_BOOT) The Safe Boot button can be pressed anytime to force the system to reboot into the BIOS safe mode. This button temporarily applies safe settings to the BIOS while retaining any overclocked settings allowing you to modify the settings causing boot failure. Use this button when
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 43
    only supports guide. 9. PCIe x16 Lane switch These slide switches allows you to enable and disable the corresponding PCIe x16 slots. When one of the installed PCIe x16 cards is out of order, you can use the slide switch to find out the faulty one without removing the cards. ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 44
    , a processor may need to operate at -80°C under load and only 75°C when idle to maintain stability at 5.8GHz. At lower frequencies, the CPU's temperature tolerance increases. It will however remain stable at lower frequencies at much colder or warmer temperatures. Once it comes out of a heavy load
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 45
    Chapter 1 1.2.7 Onboard LEDs 1. BIOS LED The BIOS LEDs help indicate the BIOS activity. Press the BIOS button to switch between BIOS1 and BIOS2 and the LED lights up when the corresponding BIOS is in use. 2. PCIE Lane LED indicator Indicates the PCIE lane used. ASUS RAMPAGE V EXTREME 1-27
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 46
    Chapter 1 3. Q LED Q LEDs check key components (CPU, DRAM, VGA card, and boot devices) in sequence during motherboard booting process. If an error is found, the corresponding LED will continue lighting until the problem is solved. This user-friendly design provides an intuitive way to locate the
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 47
    ) Memory Installed CPU post-memory initialization Post-Memory System Agent initialization is started Post-Memory PCH initialization is started DXE IPL is started Memory initialization error. Invalid memory type or incompatible memory speed (continued on the next page) ASUS RAMPAGE V EXTREME 1-29
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 48
    F8 Description Unspecified memory initialization error Memory not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed Internal CPU error Reset PPI is not available Reserved for future AMI error
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 49
    started NVRAM initialization Installation of the PCH Runtime Services CPU DXE initialization is started PCI host bridge initialization DXE codes Boot Device Selection (BDS) phase is started Driver connecting is started PCI Bus initialization is started PCI Bus page) ASUS RAMPAGE V EXTREME 1-31
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 50
    Codes section below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End NVRAM settings) Reserved for future AMI codes CPU initialization error System Agent initialization error (continued on the next
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 51
    loading Boot Option (LoadImage returned error) Boot Option is failed (StartImage returned error) Flash update is failed Reset protocol is not available ACPI/ASL Checkpoints Code 0x01 0x02 0x03 0x04 0x05 transitioned into ACPI mode. Interrupt controller is in APIC mode. ASUS RAMPAGE V EXTREME 1-33
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 52
    Chapter 1 1.2.8 Jumper 1. LN2 Mode jumper (3-pin LN2_MODE) With LN2 mode activated, the ROG motherboard is optimized to remedy the cold-boot bug during POST and help the system boot successfully. 1-34 Chapter 1: Product introduction
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 53
    through the onboard Intel® X99 chipset. • These connectors BIOS to [RAID Mode]. Refer to the PCH Storage Configuration section for details. • Before creating a RAID array, refer to the RAID configurations section or the manual bundled in the motherboard support DVD. ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 54
    slot is occupied by X4 device, both the SATAEXPRESS_E1, USB3_E910 ports, and the PCIE_X1_1 slot will be disabled. 3. ROG Extension connector (18-1 pin ROG_EXT) This connector is for the OC Panel and other ROG accessories supporting the ROG_ EXT connector. 1-36 Chapter 1: Product introduction
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 55
    BIOS>Monitor>Temperature Monitor. 5. USB 3.0 connector (20-1 pin USB3_12, USB3_34) This connector is for the additional USB 3.0 ports, and complies with the USB 3.0 specification that supports to install the related driver to fully use the USB 3.0 ports under Windows® 7. ASUS RAMPAGE V EXTREME 1-37
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 56
    a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. The USB 2.0 module is purchased
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 57
    connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. ASUS RAMPAGE V EXTREME 1-39
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 58
    to this connector to take advantage of the motherboard's high-definition audio capability. • If connector, set the Front Panel Type item in the BIOS setup to [HD]; if you want to connect an TPM connector (20-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which securely
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 59
    11. M.2 connector The M.2 (Socket 3) with M Key supports type 2260 (22 mm x 60 mm), 2280 (22 mm x 80 mm), and 22110 (22 mm x 110 mm) PCIe interface storage devices. The PCIE_X8_4 slot shares bandwidth with M.2 x4. When PCIE_X8_4 is occupied, the M.2 will be disabled. ASUS RAMPAGE V EXTREME 1-41
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 60
    Chapter 1 12. ATX power connectors (24-pin EATXPWR; 4-pin EATX12V_1; 8-pin EATX12V_2; 4-pin EZ_PLUG) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 61
    supports several BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 62
    Chapter 1 14. ROG Logo LED connector (3-pin ROG) This connector is for the box (labelled Republic of Gamers) below the CPU socket. Connect the box's cable to this connector. The box lights up when you turn on the system. 1-44 Chapter 1: Product introduction
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 63
    to locate the respective ProbeIt points. Using ProbeIt You can connect the multimeter to the motherboard as shown on the following figure. The illustration above are for reference only, the actual motherboard layout and measure points location may differ by models. ASUS RAMPAGE V EXTREME 1-45
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 64
    Chapter 1 1-46 Chapter 1: Product introduction
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 65
    motherboard layout may vary with models, but the installation steps are the same for all models. 1. Install the ASUS Q-Shield to the chassis rear I/O panel. 2. Place the motherboard into the chassis ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 66
    3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. 2-2 Chapter 2: Basic Installation
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 67
    Chapter 2 2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA2011-v3 socket only. DO NOT install a CPU designed for LGA1150, LGA1155, and LGA1156 sockets on the LGA2011-v3 socket. Triangle mark Load lever ASUS RAMPAGE V EXTREME 2-3
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 68
    Chapter 2 edge of the Load plate Triangle mark Load plate PnP cap 2-4 Chapter 2: Basic Installation
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 69
    2.1.3 CPU heatsink and fan assembly installation Apply the thermal interface material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. Installing the CPU heatsink and fan assembly Chapter 2 ASUS RAMPAGE V EXTREME 2-5
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 70
    Uninstalling the CPU heatsink and fan assembly Chapter 2 2-6 Chapter 2: Basic Installation
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 71
    Replacing the LGA2011-v3 CPU pad (X-Socket 2) The X-Socket 2 is a unique ROG feature that allows the user to use their LN2 pot on the LGA 2011-v3 motherboard. Chapter 2 ASUS RAMPAGE V EXTREME 2-7
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 72
    2.1.4 DIMM installation Chapter 2 To remove a DIMM 2-8 Chapter 2: Basic Installation
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 73
    2.1.5 ATX Power connection Chapter 2 OR OR ASUS RAMPAGE V EXTREME 2-9
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 74
    Chapter 2 2.1.6 SATA device connection OR OR 2-10 Chapter 2: Basic Installation
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 75
    2 2.1.7 Front I/O Connector Installing the ASUS Q-Connector HDD LED+ HDD LED- HDD LED PWR Ground Reset Ground POWER SW RESET SW Installing the USB 2.0 connector Installing the front panel audio connector USB 2.0 Installing the USB 3.0 connector USB 3.0 ASUS RAMPAGE V EXTREME AAFP 2-11
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 76
    Chapter 2 2.1.8 Expansion Card installation Installing the PCIe x16 cards Installing the PCIe x1 cards 2-12 Chapter 2: Basic Installation
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 77
    to the Wi-Fi ports. • Ensure to install the Bluetooth driver before installing the Wi-Fi GO! software. The illustration above is for reference only. The I/O port layout may vary with models, but the Wi-Fi antenna installation procedure is the same for all models. ASUS RAMPAGE V EXTREME 2-13
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 78
    the BIOS update is ongoing, otherwise the update will be interrupted. In case of interruption, please follow the steps again. • Updating the BIOS may have risks. If the BIOS program is damaged during the process and results in the system's failure to boot up, please contact your local ASUS Service
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 79
    ROG Connect button 6. USB 2.0 ports 7 and 8. 7. USB 3.0 ports E1, E2, E3, and E4. Supports ASUS 3.0 Boost Turbo Mode. 8. USB 3.0 ports E5, E6, E7, and E8. Supports ASUS 3.0 Boost Turbo Mode. 9. U SB 3.0 ports E9 and E10. Supports ASUS PCIE_X1_1 slot will be disabled. ASUS RAMPAGE V EXTREME 2-15
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 80
    Orange (Blinking Ready to wake up then steady) from S5 mode ACT/LINK SPEED LED LED LAN port You can disable the LAN controllers in BIOS. Due to hardware design, the LAN1 port's LEDs may continue to blink even when disabled. ** Bluetooth and Wi-Fi module LED indications Wi-Fi LED
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 81
    Chapter 2 2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers ASUS RAMPAGE V EXTREME 2-17
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 82
    Chapter 2 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers 2-18 Chapter 2: Basic Installation
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 83
    need to go to the BIOS settings or use software utilities asus.com for the latest firmware and updates about the OC Panel. • Ensure that you have installed ROG Connect Plus driver for the NORMAL Mode of the OC Panel. 2.4.1 OC Panel Overview Normal/Extreme Mode switch CPU ASUS RAMPAGE V EXTREME 2-19
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 84
    Chapter 2 OC Panel LCM Display in Normal Mode OC Panel LCM Display in Extreme Mode Extreme Mode capabilities including V1, V2, DRAM, and other voltage definitions vary by chipset. Please refer to your motherboard manual for details. 2-20 Chapter 2: Basic Installation
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 85
    Ensure that you have installed ROG Connect Plus driver for the NORMAL Mode of the OC Panel. The OC Panel in Normal Mode mainly provides easy access buttons for increasing your CPU's frequency level, adjusting fan . If it does not fit, try reversing it. Clear OK Reset ASUS RAMPAGE V EXTREME 2-21
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 86
    bay with four (4) screws. 9. Connect the OC Panel data cable (A) and a SATA Power cable (B) to the OC Panel. 10. Locate the ROG_EXT connector on the motherboard and connect the OC Panel cable. 11. Boot your computer. 12. Press the OC Panel LCM Power button to turn on the OC Panel LCM
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 87
    vary by chipset. Please refer to your motherboard manual for details. To setup the OC Panel in Extreme Mode: 1. Shut down your computer. motherboard and connect the OC Panel cable. 4. Boot your computer. 5. Press the OC Panel power button to turn on the OC Panel LCM display. ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 88
    keyboard detected No memory detected No VGA detected Hardware component failure 7. Hold down the key during power on to enter the BIOS Setup. Follow the instructions in Chapter 3. 2.6 Turning off the computer While the system is ON, press the power button for less than four seconds to put
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 89
    Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. When downloading or updating the BIOS file, rename it as R5E.CAP for this motherboard. Chapter 3 ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 90
    the motherboard to the default value. For more information about the Safe-Mode button, see the Onboard buttons and switches section on Chapter 1 of this user guide. For the Clear CMOS button. see the section about Rear I/O Connection on Chapter 2. - The BIOS setup program does not support bluetooth
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 91
    BIOS settings. The default screen for entering the BIOS setup program can be changed. For more information, see the Setup Mode item of the Boot menu section on Chapter 3. Displays the CPU/motherboard temperature, CPU voltage output, CPU is installed to the system. ASUS RAMPAGE V EXTREME 3-3
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 92
    Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of Advanced Mode temperature, CPU, and memory voltage output Menu bar The menu bar on top of the screen has the following main items: My Favorites Main Extreme Tweaker Advanced
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 93
    F3: Shortcut list, the default shortcut support the following keyboard functions: delete, cut, copy, and paste. • You can only use the alphanumeric characters to enter your notes. Last Modified button This button shows the items that you last modified and saved in BIOS Setup. ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 94
    3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. Chapter 3 Adding items to My Favorites To add frequently-used BIOS items to My Favorites: 1. Use the arrow keys to select an item that you want to add. When using a mouse, hover the
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 95
    clear the BIOS password. See the section about Rear I/O Connection in Chapter 2 for more information. • The Administrator or User Password items on top of the screen show the default [Not Installed]. After you set a password, these items will be displayed as [Installed]. ASUS RAMPAGE V EXTREME 3-7
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 96
    you enter the administrator password when accessing the system. Otherwise, you may be restricted from viewing or modifying certain fields in the BIOS Setup program. To set an administrator password: 1. Select the Administrator Password item and press . 2. From the Create New Password box, key
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 97
    of the Extreme Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Scroll down to display other BIOS items. Chapter 3 ASUS RAMPAGE V EXTREME 3-9
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 98
    the desired CPU internal frequency. Select any of these preset overclocking configuration options: [Auto] Loads the optimal settings for the system. [Manual] Allows you to individually set overclocking parameters. [X.M.P.] If you install memory modules supporting the eXtreme Memory Profile
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 99
    Auto] Allows you to set the 4 Core Ratio Limit [Auto] Select to apply the CPU default Turbo Ratio setting [Manual] Select to manually assign a 4-Core Ratio Limit value that is higher than or equal to the 3-Core frequency to DRAM frequency ratio is set to 100:100. ASUS RAMPAGE V EXTREME 3-11
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 100
    Helps improve benchmark performance. Configuration options: [Disabled] [Enabled] CPU Level Up [Auto] Allows you to overclock the CPU at a certain frequency. Configuration options: [Auto] [4.4000G] [Light Power Saving] [Medium Power Saving] [Max Power Saving] Chapter 3 3-12 Chapter 3: BIOS setup
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 101
    memory preset or timing profile from a redefined list. The configurations of the memory presets are provided by the ROG OC expert team. Users can load the profiles options: [Auto] [1] - [63] DRAM Command Rate [Auto] Configuration options: [Auto] [1] - [3] Chapter 3 ASUS RAMPAGE V EXTREME 3-13
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 102
    ] - [15 DRAM Clock] tWRDR [Auto] Configuration options: [Auto] [0 DRAM Clock] - [15 DRAM Clock] tWRDD [Auto] Configuration options: [Auto] [0 DRAM Clock] - [15 DRAM Clock] 3-14 Chapter 3: BIOS setup
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 103
    options: [Auto] [0 DRAM Clock] - [7 DRAM Clock] tCCDWR [Auto] Configuration options: [Auto] [0 DRAM Clock] - [7 DRAM Clock] tCCD_L [Auto] Configuration options: [Auto] [0 DRAM Clock] - [7 DRAM Clock] Chapter 3 ASUS RAMPAGE V EXTREME 3-15
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 104
    options: [Auto] [1] - [255] DRAM IOL (CHA D1 R1) [Auto] Configuration options: [Auto] [1] - [255] DRAM IOL (CHB D0 R0) [Auto] Configuration options: [Auto] [1] - [255] 3-16 Chapter 3: BIOS setup
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 105
    ] - [99] DRAM Vref (CHD) [Auto] Configuration options: [Auto] [60] - [99] CTL Vref (CHAB) Sign [+] Configuration options: [+] [-] CTL Vref (CHAB) [Auto] Configuration options: [Auto] [0.00] - [0.20] ASUS RAMPAGE V EXTREME 3-17
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 106
    : [Auto] [1.00] - [1.60] Receiver ODT Pre-emphasis [Auto] Configuration options: [Auto] [1.00] - [1.60] Transmitter ODT Pre-emphasis [Auto] Configuration options: [Auto] [1.00] - [1.60] 3-18 Chapter 3: BIOS setup
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 107
    [Auto] Configuration options: [Auto] [Enabled] [Disabled] DRAM Training [Auto] Configuration options: [Auto] [Enabled] [Disabled] MemTest on Fast Boot [Disabled] Configuration options: [Auto] [Enabled] [Disabled] Chapter 3 ASUS RAMPAGE V EXTREME 3-19
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 108
    [Regular] [Medium] [High] [Ultra High] [Extreme] The actual performance boost may vary depending on your CPU specification. CPU VRM Switching Frequency [Auto] This item affects the VRM transient response speed and the component thermal efficiency. Select [Manual] to configure a higher frequency for
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 109
    Phase Control (CHA, CHB)/ CHC, CHD) [Optimized] Allows you to enable or disable the DRAM CD settings. [Optimized] Set to the optimized ASUS phase tuning profile. [Standard] The phase control will be based on the CPU command. [Extreme] Set to the full phase mode. ASUS RAMPAGE V EXTREME 3-21
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 110
    Clock Amplitude [Auto] Enable this item to enhance the power saving condition. Configuration options: [Auto] [Normal] [Higher] Do not remove the thermal module when the manual mode is selected. The thermal conditions should be monitored. Chapter 3 3-22 Chapter
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 111
    ASUS motherboards can support the duration for longer time. CPU CPU is in a low power state. Select the high performance mode to make the FIVR (fully integrated voltage regulator) work in a high performance at all times. Configuration options: [Auto] [Enabled] [Disabled] ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 112
    Mode] [Offset Mode] [Adaptive Mode] The following item appears only when you set the CPU Core Voltage to [Manual Mode]. CPU Core Voltage Override [Auto] This item allows you to configure the CPU core voltage. Use or key to adjust the value. The values range from 0.001V to 1.920V at 0.001V
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 113
    CPU cores when running in turbo mode. Increase the voltage when configuring a high CPU core frequency. The voltage you set is affected by the offset value. Use the or keys to adjust the value. The values range from 0.001V to 1.920 V with a 0.001 V interval. Chapter 3 ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 114
    . The values range from 0.001V to 0.999V at 0.001V increment. CPU SVID Support [Auto] Set this item to stop the CPU from communicating with the external voltage regulator. Disable this item when you overclock The values range from 1.20V to 2.20V at 0.00635V increment. 3-26 Chapter 3: BIOS setup
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 115
    or keys to adjust the value. Configuration options: [Auto] [1] - [20] CPU Spread Spectrum [Auto] This item allows you to enhance the BCLK overclocking capability or reduce the enable or disable BCLK Recovery. Configuration options: [Disabled] [Enabled] [Ignore] ASUS RAMPAGE V EXTREME 3-27
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 116
    3.6 Advanced menu The items in Advanced menu allow you to change the settings of the CPU and other system devices. Be cautious when changing the settings of the items in Advanced menu. Incorrect field values can cause the system to malfunction. Chapter 3 3-28 Chapter 3: BIOS setup
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 117
    this menu show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. Chapter 3 Hyper with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3). Configuration options: [Disabled] [Enabled] ASUS RAMPAGE V EXTREME 3-29
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 118
    Enabled] This item allows the CPU to prefetch commands and data your CPU. Active Processor Core (0-5) [Enabled] Configuration options: [Enabled] [Disabled] CPU Power CPU's power management system. Enhanced Intel SpeedStep Technology [Enabled] This item allows your system to adjust the CPU
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 119
    system. Configuration options: [Enabled] [Disabled] Package C State Support [Auto] This item allows you to set the a C-state support for the CPU package. Configuration options: [Auto] [C0/C1 state] [C2 state] [C6(non Retention) state] [C6(Retention) state] Chapter 3 ASUS RAMPAGE V EXTREME 3-31
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 120
    . USB3_E910 is enabled and PCIE_X1_1 is disabled. The PCIE_X4_1 is limited to X2 bandwidth and when it is occupied, SATAEXPRESS_E1 is disabled. Chapter 3 3-32 Chapter 3: BIOS setup
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 121
    3.6.3 PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. Scroll down to display the other BIOS items. Chapter 3 ASUS RAMPAGE V EXTREME 3-33
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 122
    SRIS support for connected SATAEXPRESS devices. [Disabled] Select this option for ASUS Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage Support. Configuration options: [Disabled] [Enabled] 3-34 Chapter 3: BIOS setup
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 123
    to enable/disable the Intel Virtualization Technology for Directed I/O (VT-d) by reporting the I/O device assigment to VMM through DMAR ACPI Tables. Configuration options: [Enabled] [Disabled] ASUS RAMPAGE V EXTREME 3-35
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 124
    driver is installed in the operating system. [Enabled] Enables the xHCI controller. [Disabled] Disables the xHCI controller. xHCI Legacy Support [Enabled] [Disabled] The USB 3.0 devices can be used for the BIOS setup only and cannot be recognized in the boot devices list. [Enabled] Support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 125
    BIOS for operating systems without EHCI support. USB Single Port Control [Disabled] Allows you to enable or disable the individual USB ports. Configuration options: [Enabled] [Disabled] Refer to the Motherboard layout section for the location of the USB ports. Chapter 3 ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 126
    support for the downstream devices. Configuration options: [Auto] [Disabled] [L1 only] PEG ASPM Support [Disabled] Allows you to enable or disable the ASPM support [Enabled] [Disabled] ASPM Support [Disabled] This option allows you to enable or disable the ASPM support for all downstream devices.
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 127
    3.6.7 Onboard Devices Configuration Scroll down to view the other BIOS items. Chapter 3 HD Audio Controller [Enabled] [Disabled] Disables the controller. [ you to enable the ASMedia® USB 3.0 controller of your system. Configuration options: [Disabled] [Enabled] ASUS RAMPAGE V EXTREME 3-39
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 128
    SATAEXPRESS_E1 SRIS Support [Auto] [Auto] The system automatically adjusts the SRIS support for connected SATAEXPRESS devices. [Disabled] Select this option for ASUS RUNWAY SATA ROM of the Intel LAN's controller. Configuration options: [Enabled] [Disabled] 3-40 Chapter 3: BIOS setup
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 129
    a wake event. [Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/ Minute/Second will become user-configurable with set values. Chapter 3 ASUS RAMPAGE V EXTREME 3-41
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 130
    PXE Support [Enabled] Allows you to enable or disable the Ipv4/Ipv6 PXE boot option. Configuration options: [Disabled] [Enabled] 3.6.10 ROG Effects Onboard LED [Enabled] This switch enables you to turn on/off all the onboard LEDs. Configuration options: [Disabled] [Enabled] ROG
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 131
    automatically detects and displays the CPU and motherboard temperature. Press and select [Ignore] if you do not wish to display the detected temperatures. CPU FAN Speed; CPU Optional Fan Speed; Chassis FAN and configure the minimum duty cycle for each fan. ASUS RAMPAGE V EXTREME 3-43
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 132
    control parameters. The following items appear only when you set the CPU Fan Profile to [Manual]. CPU Upper Temperature [70] Use the and keys to adjust the upper limit of the CPU temperature. The values range from 20°C to 75°C. CPU Fan Max. Duty Cycle (%) [100] Use the and keys to
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 133
    appear only when you set Chassis Fan 1 A/B Profile, Chassis Fan 2 A/B Profile, Chassis Fan 3 A/B Profile to [Manual]. Chassis Fan 1/2/3 Upper Temperature [70] Use the or keys to adjust the upper limit of the CPU temperature. The values range from 20°C to 75°C. ASUS RAMPAGE V EXTREME 3-45
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 134
    CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature reaches the upper limit, the CPU the lower limit of the CPU temperature. Chassis Fan 1/2/3 Min ] [Enabled] Anti Surge Support [On] This item allows motherboard's components. Configuration options: [On] [Off] Chapter 3
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 135
    change the system boot options. Scroll down to display the other BIOS items. Chapter 3 Fast Boot [Disabled] [Disabled] Allows your items appear only when you set the Fast Boot to [Enabled]. SATA Support [All Devices] [All Devices] [Hard Drive Only] [Boot Drive Only ASUS RAMPAGE V EXTREME 3-47
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 136
    Network Stack Driver Support [Disabled] This item allows you to enable or disable the Network Stack Driver Support function. item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. The values
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 137
    compatibility, enable the CSM to fully support the non-UEFI driver add-on devices or the Windows® UEFI mode. [Disabled] Disable the CSM to fully support the non-UEFI driver add-on devices or the Windows® options: [UEFI and Legacy] [Legacy OpROM only] [UEFI only] ASUS RAMPAGE V EXTREME 3-49
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 138
    to launch. Configuration options: [Ignore] [Legacy OpROM first] [UEFI driver first] Boot from Storage Devices [Legacy OpROM first] This item allows booting on Windows® non-UEFI mode. Microsoft® Secure Boot only supports Windows® UEFI mode. Key Management This item allows you to 3: BIOS setup
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 139
    variable. DB Management The db (Authorized Signature database) lists the signers or images of UEFI applications, operating system loaders, and UEFI drivers that you can load on the single computer. Delete a storage device so that more images can be loaded securely. ASUS RAMPAGE V EXTREME 3-51
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 140
    authenticated variable. DBX Management The dbx (Revoked Signature database) lists the forbidden images of db items that are no longer trusted > after POST (Windows® 8 not supported). • To select the boot device during system startup, press when ASUS Logo appears. Boot Override These item
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 141
    2 Utility Allows you to run ASUS EZ Flash 2. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more information, see the ASUS EZ Flash 2 Utility section. ASUS RAMPAGE V EXTREME 3-53
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 142
    updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/ CPU configuration and BIOS version BIOS1 Select [Yes] to copy the content of BIOS1 to BIOS2. ASUS DRAM SPD Information This item allows you to view the DRAM SPD
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 143
    The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Chapter 3 application (shellx64.efi) from one of the available filesystem devices. ASUS RAMPAGE V EXTREME 3-55
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 144
    of BIOS, DO NOT manually update the BIOS. Inappropriate BIOS updating may result in the system's failure to boot. Carefully follow the instructions of this chapter to update your BIOS if necessary. Visit the ASUS website at www.asus.com to download the latest BIOS file for this motherboard. The
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 145
    that contains the latest BIOS, and then press . 5. Press to switch to the Folder Info field. 6. Press the Up/Down arrow keys to find the BIOS file, and then press to perform the BIOS update process. Reboot the system when the update process is done. ASUS RAMPAGE V EXTREME 3-57
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 146
    or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 147
    screen displays may not be same as shown. Before updating BIOS 1. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition. 2. Download the latest BIOS file and BIOS Updater from the ASUS website at http://support.asus.com and save them on the USB flash drive
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 148
    press to switch from Files panel to Drives panel then select D:. ASUSTek BIOS Updater for DOS V1.30 [2012/05/22] FLASH TYPE: MX1C 25L1065A Current ROM BOARD:RAMPAGE V EXTREME VER: 0106 DATE: 2014-06-30 Update ROM BOARD: UNKNOWN VER: UNKNOWN DATE: UNKNOWN PATH: A:\ A: R5E.CAP 2097152 2014
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 149
    the system while updating the BIOS to prevent system boot failure. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select Load Optimized Defaults item under the Exit BIOS menu. See section 3.10 Exit menu for details. Chapter 3 ASUS RAMPAGE V EXTREME 3-61
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 150
    Chapter 3 3-62 Chapter 3: BIOS setup
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 151
    optical drive. 2. In the AutoPlay dialog box, click Run ASSETUP.exe. Chapter 4 If the AutoPlay dialog box does not appear, browse the contents of the support DVD and double-click or tap \\bin\ASSETUP.EXE to launch the ASUS motherboard support DVD main menu. ASUS RAMPAGE V EXTREME 4-1
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 152
    and other software that the motherboard supports. Manual menu Click to see the list of supplementary user manuals. Click an item to open the folder of the user manual. Video menu Click to see ROG product related videos. Contact menu Click to display the ASUS contact information. Specials menu Click
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 153
    you wish to read. 3. Some software manuals are provided in different languages. Open the language's folder to view the software manual. The screenshots in this section are for reference only. The actual software manuals containing in the support DVD vary by models. ASUS RAMPAGE V EXTREME 4-3
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 154
    features of AI Suite 3, ensure that you install the Wi-Fi module and its latest driver from the bundled support DVD. To do this, go to Drivers tab > ASUS Bluetooth 4.0 Wi-Fi Driver and follow the succeeding onscreen instructions. To install AI Suite 3 on your computer: Windows® 7 OS 1. Place the
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 155
    onscreen instructions. 2. From the ASUS motherboard support DVD main menu, select the Utilities tab and click AI Suite 3. 3. Follow the succeeding onscreen instructions. If the ASUS motherboard support DVD a mouse, click the AI Suite 3 app on the Start screen). Chapter 4 ASUS RAMPAGE V EXTREME 4-5
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 156
    + EZ Update USB BIOS Flashback Wi-Fi Engine USB 3.0 Boost System USB Charger+ Push Notice Version Information • Some functions in the AI Suite 3 main menu in this user guide may vary depending on the motherboard model. • Refer to the software manual in the support DVD or visit the ASUS website at
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 157
    on real-time usage to provide the best system status. It covers the essential areas such as CPU performance, energy saving, stable digital power, cool and quiet fan control, and includes tailored settings system DO NOT remove your fan during the tuning process. Chapter 4 ASUS RAMPAGE V EXTREME 4-7
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 158
    • Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Frequency in TPU. Refer to the BIOS chapter of your motherboard's user guide for details. • The CPU Frequency bars show the status of the CPU cores, which vary with your CPU model. Chapter 4 4-8 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 159
    to adjust the CPU Strap's BCLK (base clock) frequency Click or tap to load the saved profile Click or tap to apply Click to undo the the default settings adjustments Click or tap to save the adjustment into a profile Click or tap to apply the adjustments Chapter 4 ASUS RAMPAGE V EXTREME 4-9
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 160
    quieter computing environment. With its automatic fan tuning feature, ASUS Fan Xpert 3 automatically tweaks the settings of CPU and chassis fans to create the best cooling profiles. ASUS Fan Xpert 3 also supports hardware level PWM/DC combo mode for the CPU and chassis fans. You can also reduce the
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 161
    following screens are for reference only. Configuration options varies depending on the motherboard model. Chapter 4 Click or tap to switch Click or tap to undo power saving condition of the CPU. Tick ON to get a quicker transient response while saving the CPU power. ASUS RAMPAGE V EXTREME 4-11
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 162
    and thermal performance. Reduce the number of active phases under a light system load to increase efficiency. The actual performance boost may vary depending on your CPU specification. 4-12 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 163
    App List, you can set the CPU frequency, CPU performance profile to a selected application. Audio pane Allows you to manually assign a preset audio configuration to a selected application. LAN pane Allows you assign a network priority to a selected application. Chapter 4 ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 164
    4 Click or tap to apply the default settings Click or tap to undo the adjustments Click or tap to apply the adjustments 4-14 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 165
    from the lowest based on your preferred default value. • Configured Max CPU Power may decrease the total power delivery to the CPU and affects the CPU performance under system heavy load. To restore your system to its default settings, reboot your computer. Chapter 4 ASUS RAMPAGE V EXTREME 4-15
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 166
    setting for Voltage Decrement Move the sliders to adjust Configured Max CPU Power settings Click or tap to select a fan profile Tick Global Setting Toggle to set SATA Power on or off Toggle to set Configured Max CPU Power on or off Chapter 4 Click to enable the default settings Click to undo the
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 167
    automatically detects the USB 3.0 devices that support UASP. For a list of UASP-supported USB 3.0 devices, visit the ASUS website at www.asus.com. • The data transfer speed varies with USB devices. For higher data transfer performance, use a USB 3.0 device. Chapter 4 ASUS RAMPAGE V EXTREME 4-17
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 168
    is a utility that allows you to automatically update your motherboard's software, drivers, or BIOS. With this utility, you can also manually update the BIOS and select the boot logo that will display during POST. Launching EZ Update To launch EZ Update, click or tap on the top-right corner of
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 169
    System Information. on the top-right corner of the AI Suite 3 Viewing the motherboard information Click or tap the MB tab to view the motherboard's information. Viewing the CPU information Click or tap the CPU tab to view the processor's information. Chapter 4 ASUS RAMPAGE V EXTREME 4-19
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 170
    Viewing the SPD information Click or tap the SPD tab to view the memory's information. Chapter 4 4-20 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 171
    In the Download Setting field, tick Schedule (days) then select the number of days to change how frequently the software checks for an updated BIOS. 2. Click or tap Apply to save the BIOS download schedule. Click or tap Cancel to cancel the download schedule. Chapter 4 ASUS RAMPAGE V EXTREME 4-21
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 172
    this utility. Refer to the Rear I/O connection section of your user guide for more details. • USB Charger+ does not support USB hubs, USB extension cables, and generic USB cables. • USB Charger+ may not recognize some ASUS devices due to varying design. Chapter 4 4-22 Chapter 4: Software
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 173
    computer that you want to pair with. To pair your computer and smart device, ensure that both are connected to the same wireless network. Chapter 4 ASUS RAMPAGE V EXTREME 4-23
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 174
    device Tick to select the smart device Tick to send alert when the selected items are back to its normal status Chapter 4 4-24 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 175
    Tap to scan more host computers Tick to select the smart device Click or tap to send your message Tap to delete PC alerts Chapter 4 ASUS RAMPAGE V EXTREME 4-25
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 176
    top-right corner of the AI Suite 3 main Ai Charger+ is available only in selected motherboard models. Ai Charger+ screen Chapter 4 Tick to enable or disable Ai Charger+ Click or +. • Ai Charger+ does not support USB hubs, USB extension cables, and generic USB cables. 4-26 Chapter 4:
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 177
    the top-right corner of the AI Suite 3 main Wi-Fi Engine is available only in selected motherboard models. Using Wi-Fi Engine Using the Client Mode The Client mode allows you to connect your system point Click or tap to connect to a wireless access point Chapter 4 ASUS RAMPAGE V EXTREME 4-27
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 178
    3. From the list of available networks, select a network that you want to connect to. Some networks may require you to key in a password. Using the AP Key in your password for confirmation Click or tap to disable AP mode Click or tap to enable AP mode Chapter 4 4-28 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 179
    and login the same ASUS Account on your PC and smart devices for public-to-private network functions. • Remote Desktop and File Transfer support public-to-private networks feature. • You can access the ASUS Account tab by clicking from Wi-Fi GO! main page. Chapter 4 ASUS RAMPAGE V EXTREME 4-29
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 180
    . The browser will direct you to the ASUS website (www.asus.com). 2. From the ASUS website, click or tap Sign Up then follow onscreen instructions to complete the registration. Logging in To window, key in your ASUS account and password (A) then click Login (B). Chapter 4 4-30 Chapter 4: Software
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 181
    you smart device. 2. Tap ASUS Account (A), key in your ASUS Account and password, then click or tap Login (C). • PCs with the same ASUS account logged in will show up in the device list. • The public-to- Wi-Fi GO! & NFC Remote of this user manual for more details. ASUS RAMPAGE V EXTREME 4-31
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 182
    your computer or log in on your computer and smart devices using the same ASUS account to fully utilize the WiFi GO! functions across different networks. 2. On tap Wi-Fi GO! then tap Enter. & NFC Remote 3. From the list of scanned PCs, tap the computer that you want to connect with your smart support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 183
    computer's Wake-on-LAN settings. To configure your computer's Wake-on-LAN settings: 1. From BIOS Setup, go to Advanced > APM Configuration then set Power On By PCI-E/ PCI to [ LAN function will be supported in the later version for Windows® 8 operating system. Chapter 4 ASUS RAMPAGE V EXTREME 4-33
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 184
    Cloud GO! Cloud GO! allows you to control and synchronize your files across multiple cloud services such as ASUS WebStorage, Dropbox®, Google Drive™, and SkyDrive®. • Ensure to set the correct system date and GO!/Remote GO! screen Tick to select contents Chapter 4 4-34 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 185
    Desktop function keys Chapter 4 Select multitouch mode to support Microsoft multitouch functions on Windows® 8 / 8.1. Select mouse mode to support zoom-in and normal mouse functions. The Extended Mode support varies with the VGA driver installed in your computer. ASUS RAMPAGE V EXTREME 4-35
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 186
    Notification: 1. Click Select Device. Chapter 4 2. Select a device from the drop list. 3. Click Send to send the Remote Desktop control authorization to the selected device. Notice installer from the bundled support DVD or download the latest installer from www.asus.com. 4-36 Chapter 4: Software
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 187
    \ASUS HomeCloud\Wi-Fi GO!\File Transfer\ • To select a new storage location, click Setting. Another way to transfer files is to open the file directly, tick the file, tap the Share icon/ button then click the File Transfer app to start sending the file to the computer. ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 188
    tasks and apps Control keys Tap to mimic leftclick function Tap to mimic rightclick mouse function Slide up/down to scroll Chapter 4 4-38 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 189
    devices first. • ASUS Media Streamer supports NFC function. Some functions may require you to install NFC EXPRESS 2. Visit www.asus.com for more ASUS account to stream Click or tap a media file to play play in different networks Select the device you want to stream to ASUS RAMPAGE V EXTREME 4-39
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 190
    files Click or tap to proceed with the deletion or addition of files Click or tap to cancel changes The following media formats are supported by Android and iOS devices: • Android: .3gp, .mp4, .m4a, .aac, .ts, .flac, .mp3, .mid, .xmf, .mxmf, .rtttl, .rtx, .ota, .imy, .ogg, .mkv, .wav, .jpg
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 191
    4.6 ROG Audio features Installing the Software Follow the installation wizard to install the Realtek® Audio Manager driver from the support DVD that is bundled with the motherboard. If the Realtek and offers optimized virtual surround technology for gaming. Chapter 4 ASUS RAMPAGE V EXTREME 4-41
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 192
    Equalizer switch is enabled. This item allows you to configure the Equalizer settings. You can manually set or customized your setting or choose from any of the preset equalizer settings available. export, or revert to the default setting of a profile. Chapter 4 4-42 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 193
    Sonic SenseAmp Sonic SenseAmp is an exclusive ROG invention that is a built-in headphone AMP on the onboard audio circuit with Amplify Level is automatically set at Powerful Amplify Level is automatically set at Extreme The device plugged in detected as other device ASUS RAMPAGE V EXTREME 4-43
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 194
    After you close the pop-window, Sonic SenseAmp enters speaker configuration and displays the adjusted headphone impedance. Click or tap to manually adjust the amplify level Displays the impedance of your headphone Chapter 4 4-44 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 195
    dedicated SoundStage button on your motherboard. Refer to the Onboard buttons section on this user guide for more information. Chapter 4 Click or tap any of the four preset gaming profiles Use the slider to manually adjust ASUS RAMPAGE V EXTREME 4-45
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 196
    DTS Connect DTS Connect delivers excellent audio entertainment across all formats and works with 4, 5.1, and 7.1 channel surround sound . It also allows you to connect your PC to a home theatre system. Control settings panel Chapter 4 4-46 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 197
    or tap to reset to the default settings Click or tap to start the test tone Use the sliders to adjust the settings Displays the list of games Control Menu Allows you to configure shortcut keys. Chapter 4 ASUS RAMPAGE V EXTREME 4-47
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 198
    are enabled with shortcut keys in the game. Refer to the Controls tab for more information about the shortcut key settings. Chapter 4 4-48 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 199
    Game, Media Streaming and File Sharing) facilitating different user scenarios. Users can also manually allocate bandwidth and adjust priority settings of each application to run faster and smoother . File Sharing Mode File-sharing packets given top priority. Chapter 4 ASUS RAMPAGE V EXTREME 4-49
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 200
    and uploading bandwidth of currently used applications. Total usage Displays the total downloading and uploading bandwidth of the currently used applications. Chapter 4 4-50 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 201
    apply the speed after manually keying in the desired speed or after you performing the speed test Using the Network Information Displays information about the physical network card such as speed, physical address, IP address, subnet mask, and default gateway. Chapter 4 ASUS RAMPAGE V EXTREME 4-51
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 202
    You can also configure your PC to wake up in CPU Level UP, XMP, or directly to BIOS mode. To use KeyBot: 1. Press the KeyBot button on the motherboard. The KeyBot feature is enabled when the KEYBOT_LED light is their corresponding keys on the keyboard Chapter 4 4-52 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 203
    wish to use the Smart Input feature, click the Clean button at the top-left of the screen. Another option is to access the UEFI BIOS and erase the relevant KeyBot profile. Function Keys Shortcut Chapter 4 ASUS RAMPAGE V EXTREME 4-53
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 204
    utility provides an easy-to-use interface to identify and utilize all drive space in hard disk drives (HDD). ASUS Disk Unlocker is supported only on Windows® 7 and Windows® 8. To launch ASUS Disk Unlocker, click . Click or tap to open the help file that shows the detailed information on how to
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 205
    Dynamic Memory Allocation function Move the slider to the right to set the size allocation Click or tap to finish creating the RAMDisk drive Chapter 4 ASUS RAMPAGE V EXTREME 4-55
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 206
    a junction point. Click or tap to finish adding the new junction point. Click or tap to delete the existing junction point. Chapter 4 4-56 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 207
    Synchronizing backup files After creating a junction point, RAMDisk automatically creates a backup folder in the file's original location. Use RAMDisk to manually synchronize updates with these backup files. Click or tap Synchronize to update your files Chapter 4 ASUS RAMPAGE V EXTREME 4-57
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 208
    with other users on the ROG website. MemTweakIt functions depends on the chipset on the motherboard. Each chipset has differernt ROG website Chapter 4 Click or tap to exit MemTweakIt Click or tap to apply your settings Click or tap to validate your settings. 4-58 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 209
    configuration manually: 1. Launch MemTweakIt and click Validate. 2. In Manual Mode ASUS account ID and password. 6. Click or tap Browse, locate the saved .cvf file, and click Open. 7. Click or tap Submit. Chapter 4 Your configuration will be displayed in MemTweakIt webpage. ASUS RAMPAGE V EXTREME
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 210
    and status of your CPU, motherboard, memory, graphics card, and other components installed in your system. You can generate a report about your system info and send or post it on the CPU-Z website. To use ROG CPU-Z, double-click on the desktop. Chapter 4 4-60 Chapter 4: Software support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 211
    Press the ROG Connect Button and it will light up into a stable glow. 3. Double-click the RC TweakIt shortcut on the remote PC to activate the function Using RC TweakIt To use the RC TweakIt 1. Use the sliders and buttons to monitor or adjust your local PC. Chapter 4 ASUS RAMPAGE V EXTREME 4-61
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 212
    the POST. You can switch the display mode between String and Code. RC Remote RC Remote allows you to operate your local system through the ROG Connect cable. RC Diagram RC Diagram allows you to monitor and record your local system status. Chapter 4 4-62 Chapter 4: Software
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 213
    of both RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive and three new drives for this setup. Chapter 5 ASUS RAMPAGE V EXTREME 5-1
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 214
    5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For [RAID Mode]. 4. Save your changes, and then exit the BIOS Setup. Refer to Chapter 3 for details on entering and navigating through the BIOS Setup Due to chipset limitation, when SATA ports are set to
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 215
    you to move through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. Chapter 5 ASUS RAMPAGE V EXTREME 5-3
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 216
    Disk 9LS0BJ5H 149.0GB Non-RAID Disk Select 2 to 6 disks to use in creating the volume. [↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done Chapter 5 5-4 Chapter 5: RAID support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 217
    create this volume? (Y/N): 9. Press to create the RAID volume and return to the main menu, or to go back to the CREATE VOLUME menu. Chapter 5 ASUS RAMPAGE V EXTREME 5-5
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 218
    "? (Y/N): 3. Press to delete the RAID set and return to the utility main menu, or press to return to the DELETE VOLUME menu. Chapter 5 5-6 Chapter 5: RAID support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 219
    Exiting the Intel® Rapid Storage Technology Option ROM utility To exit the utility: 1. From the utility main menu, select 5. Exit, and then press . The following warning message appears: [ CONFIRM EXIT ] Are you sure you want to exit? (Y/N): Chapter 5 ASUS RAMPAGE V EXTREME 5-7
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 220
    >. 8. Follow the succeeding screen instructions to complete the process. 5.2.2 Creating a RAID driver disk in Windows® To create a RAID driver disk in Windows®: 1. Start Windows®. 2. Plug the USB floppy disk drive and insert a floppy disk. 3. Place the motherboard support DVD into the optical drive
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 221
    OS version. Click OK. 4. Follow the succeeding screen instructions to complete the installation. Before loading the RAID driver from a USB flash drive, you have to use another computer to copy the RAID driver from the support DVD to the USB flash drive. Chapter 5 ASUS RAMPAGE V EXTREME 5-9
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 222
    Chapter 5 5-10 Chapter 5: RAID support
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 223
    radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that could void the user's authority to operate this equipment. Appendices ASUS RAMPAGE V EXTREME A-1
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 224
    of the Canadian interference-causing equipment regulations. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: . Install and use the equipment according to the instruction manual. KC: Korea Warning Statement A-2 Appendices
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 225
    in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. battery should not be placed in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment ASUS RAMPAGE V EXTREME A-3
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 226
    the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. NCC: Taiwan Wireless Statement Japan RF Equipment Statement KC (RF Equipment) Appendices A-4 Appendices
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 227
    , Germany Fax +49-2102-959931 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-2102-5789555 Support Fax +49-2102-959911 Online support http://support.asus.com/techserv/techserv.aspx Appendices ASUS RAMPAGE V EXTREME A-5
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 228
    Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Product name : Motherboard Model name : RAMPAGE V EXTREME conform with the essential requirements of the following directives: 2004/108/EC-EMC Directive EN 55022:2010+AC:2011 EN 61000-3-2:2006+A2:2009
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 229
    A-7 ASUS RAMPAGE V EXTREME DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont, CA 94539. Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard OC
  • Asus RAMPAGE V EXTREME U3.1 | User Guide - Page 230
    Appendices A-8 Appendices
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
Motherboard
RAMPAGE V
EXTREME