Asus ROG CROSSHAIR VII HERO Users Manual English - Page 31
Internal connectors, Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_1-6
View all Asus ROG CROSSHAIR VII HERO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
1.1.9 Internal connectors 1. AMD® Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, and 10 configuration through the onboard AMD® X470 chipset. Chapter 1 • These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode Selection item in the BIOS to [RAID]. • Before creating a RAID set, refer to the RAID Configuration Guide. You can download the RAID Configuration Guide from the ASUS website. ROG CROSSHAIR VII HERO 1-15
ROG CROSSHAIR VII HERO
1-15
Chapter 1
1.1.9
Internal connectors
1.
AMD
®
Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, and 10
configuration through the onboard AMD
®
X470 chipset.
•
These connectors are set to
[AHCI]
by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[RAID]
.
•
Before creating a RAID set, refer to the
RAID Configuration Guide
. You can
download the
RAID Configuration Guide
from the ASUS website.