Asus ROG CROSSHAIR VII HERO Users Manual English - Page 77
CPU Configuration, 3.6.3 ROG Effects, PSS Support, SVM Mode, SATA Port Enable, SATA Mode
View all Asus ROG CROSSHAIR VII HERO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
3.6.2 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. Chapter 3 PSS Support This item allows you enable or disable the generation of ACPI_PPC, _PSS, and _PCT objects. Configuration options: [Disabled] [Enabled] [Auto] SVM Mode This item allows you enable or disable CPU Virtualization. Configuration options: [Disabled] [Enabled] 3.6.3 ROG Effects The items in this menu allow you to configure the LEDs on your motherboard. Onboard LED This item allows you to enable all the onboard LEDs. Configuration options: [Enabled] [Disabled] Q-Code LED Function [Disabled] Disable the Q-Code LED function. [Auto] Automatically display POST (Power-On Self-Test) code and CPU temperature on Q-Code LED. [POST Code Only] Show POST (Power-On Self-Test) code on Q-Code LED. 3.6.4 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. SATA Port Enable This item allows you to enable or disable the SATA Device. Configuration options: [Disabled] [Enabled] SATA Mode This item allows you to set the SATA configuration. [AHCI] [RAID] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. Set to [RAID] when you want to create a RAID configuration from the SATA hard disk drives. ROG CROSSHAIR VII HERO 3-15