Asus ROG CROSSHAIR VII HERO Users Manual English - Page 80
APM Configuration, 3.6.7 Network Stack Configuration, 3.6.8 HDD/SSD SMART Information
View all Asus ROG CROSSHAIR VII HERO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
3.6.6 APM Configuration The items in this menu allow you to set system wake and sleep settings. ErP Ready [Disabled] This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] Restore On AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCI-E/PCI This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled] Power On By RTC This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake event and configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or seconds to schedule an RTC alarm date. Configuration options: [Disabled] [Enabled] 3.6.7 Network Stack Configuration The items in this menu allow you to enable or disable the UEFI network stack 3.6.8 HDD/SSD SMART Information This menu displays the SMART information of the connected devices. NVM Express devices do not support SMART information. 3.6.9 NVMe Configuration You may view the NVMe controller and Drive information if an NVMe device is connected. Chapter 3 3-18 Chapter 3: BIOS Setup