Asus ROG CROSSHAIR VIII EXTREME Users Manual English - Page 29
SATA 6Gb/s connector, SATA6G_1-4, AHCI], RAID], RAID Configuration Guide
View all Asus ROG CROSSHAIR VIII EXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 1 9. SATA 6Gb/s connector The SATA 6Gb/s connector allows you to connect SATA devices such as optical disc drives and hard disk drives via a SATA cable. • If you installed SATA storage devices to the SATA6G_1-4 ports, you can create a RAID 0, 1, and 10 configuration through the onboard AMD X570 chipset. • RAID configuration and optical disc drives are not supported on the SATA6G_E1-2 ports. • These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode Selection item in the BIOS to [RAID]. • Before creating a RAID set, refer to the RAID Configuration Guide. You can download the RAID Configuration Guide from the ASUS website. ROG CROSSHAIR VIII EXTREME 1-13
ROG CROSSHAIR VIII EXTREME
1-13
Chapter 1
9.
SATA 6Gb/s connector
The SATA 6Gb/s connector allows you to connect SATA devices such as optical disc
drives and hard disk drives via a SATA cable.
•
If you installed SATA storage devices to the
SATA6G_1-4
ports, you can create a
RAID 0, 1, and 10 configuration through the onboard AMD X570 chipset.
•
RAID configuration and optical disc drives are not supported on the
SATA6G_E1-2
ports.
•
These connectors are set to
[AHCI]
by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[RAID]
.
•
Before creating a RAID set, refer to the
RAID Configuration Guide
. You can
download the
RAID Configuration Guide
from the ASUS website.