Asus ROG CROSSHAIR VIII EXTREME Users Manual English - Page 52
M.2 installation
View all Asus ROG CROSSHAIR VIII EXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2.1.4 M.2 installation Supported M.2 type varies per motherboard. • The illustrations only show the installation steps for a single M.2 slot, the steps are the same for the other M.2 slots if you wish to install an M.2 to another M.2 slot. • Use a Phillips screwdriver when removing or installing the screws or screw stands mentioned in this section. • The M.2 is purchased separately. 1. Remove the screws from the M.2_1 heatsink. 2. Gently lift and swivel the M.2_1 heatsink downwards. The heatsink has a cable connected to the motherboard, ensure not to pull on the heatsink as this may result in damages to the cable. 1 2 1 Chapter 2 2-6 Chapter 2: Basic Installation
2-6
Chapter 2: Basic Installation
Chapter 2
2.1.4
M.2 installation
Supported M.2 type varies per motherboard.
•
The illustrations only show the installation steps for a single M.2 slot, the steps are
the same for the other M.2 slots if you wish to install an M.2 to another M.2 slot.
•
Use a Phillips screwdriver when removing or installing the screws or screw stands
mentioned in this section.
•
The M.2 is purchased separately.
1.
Remove the screws from the M.2_1 heatsink.
2.
Gently lift and swivel the M.2_1 heatsink downwards.
The heatsink has a cable connected to the motherboard, ensure not to pull on the heatsink
as this may result in damages to the cable.
1
1
2