Asus ROG RAMPAGE VI EXTREME User Guide - Page 108

Intel® Virtual Raid on CPU in UEFI BIOS, IntelR Virtual Raid on CPU

Get Asus ROG RAMPAGE VI EXTREME PDF manuals and user guides View all Asus ROG RAMPAGE VI EXTREME manuals
Add to My Manuals
Save this manual to your list of manuals

Page 108 highlights

4.1.4 Intel® Virtual Raid on CPU in UEFI BIOS The CPU RAID functions of RAID 1, RAID 5, and RAID 10 require a KEY module and Intel® CPU RSTe to be enabled. • The KEY module is purchased separately. • The HYPER M.2 X16 Card is purchased separately. • Due to CPU behavior, CPU RAID functions with Intel® CPU RSTe only supports Intel® Core™ X-series Processors (6-core or above) and Intel® SSD modules. • Refer to section 1.1.9 Internal connectors for the location of the VROC_HW_KEY connector. To enter the Intel® Virtual Raid on CPU in UEFI BIOS: 1. Enter the BIOS Setup during POST. 2. Go to the Boot menu > CSM (Compatibility Support Module) > Launch CSM, then set the item to [Disabled]. 3. Go to the Advanced menu > CPU Storage Configuration, then set the PCIE slot(s) that you have installed the Hyper M.2 X16 Card(s) or PCIE X4 SSD Card(s) to Hyper M.2 X16 or PCIE X4 SSD Card correspondingly. 4. Save your changes and exit the BIOS Setup, then enter the BIOS Setup again. 5. Go to the Advanced menu > Intel(R) Virtual Raid on CPU > All Intel VMD Controllers, then press to display the Intel® Virtual Raid on CPU menu. Refer to Chapter 3 for details on entering and navigating through the BIOS Setup. Chapter 4 4-6 Chapter 4: RAID Support

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
4-6
Chapter 4: RAID Support
Chapter 4
4.1.4
Intel
®
Virtual Raid on CPU in UEFI BIOS
The CPU RAID functions of RAID 1, RAID 5, and RAID 10 require a KEY module and Intel
®
CPU RSTe to be enabled.
•
The KEY module is purchased separately.
•
The HYPER M.2 X16 Card is purchased separately.
•
Due to CPU behavior, CPU RAID functions with Intel
®
CPU RSTe only supports Intel
®
Core™ X-series Processors (6-core or above) and Intel
®
SSD modules.
•
Refer to section
1.1.9 Internal connectors
for the location of the VROC_HW_KEY
connector.
To enter the Intel
®
Virtual Raid on CPU in UEFI BIOS:
1.
Enter the BIOS Setup during POST.
2.
Go to the
Boot
menu >
CSM (Compatibility Support Module)
>
Launch CSM
, then
set the item to
[Disabled]
.
3.
Go to the
Advanced
menu >
CPU Storage Configuration
, then set the PCIE slot(s)
that you have installed the Hyper M.2 X16 Card(s) or PCIE X4 SSD Card(s) to
Hyper
M.2 X16
or
PCIE X4 SSD Card
correspondingly.
4.
Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
5.
Go to the
Advanced
menu >
Intel(R) Virtual Raid on CPU
>
All Intel VMD
Controllers
, then press <Enter> to display the Intel
®
Virtual Raid on CPU menu.
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.