Asus ROG STRIX B250G GAMING STRIX B250G GAMING BIOS ManualEnglish - Page 28

Aggressive LPM Support [Disabled] This item allows you to enable or disable PCH entering link power state aggressively Configuration options: [Disabled] [Enabled] SMART Self Test [On] SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks. Configuration options: [On] [Off] SATA6G_1~6(Charcoal Black) [Enabled] Allow you to enable/disable the SATA6G_1~6 port. Configuration options: [Disabled] [Enabled] Hot Plug [Disabled] (SATA6G_1 ~ SATA6G_6) These items allow you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] 1.6.6 PCH-FW Configuration TPM Device Selection [Discrete TPM] This item allows you to select the TPM device. Configuration options: [Discrete TPM] [Firmware TPM] 1.6.7 Onboard Devices Configuration HD Audio Controller [Enabled] This item allows you to use the Azalia High Definition Audio Controller. Configuration options: [Disabled] [Enabled] The following items appear only when you set the HD Audio Controller item to [Enabled]. DVI Port Audio [Disabled] Configuration options: [Enabled] [Disabled] Depop [Enabled] Configuration options: [Enabled] [Disabled] SupremeFX LED Lighting [Breathing Mode] Allows you to set the behavior of the audio LED. Configuration options: [Disabled] [Still Mode] [Breathing Mode] M.2_1 Configuration [Auto] [Auto] Auto-detects the M.2 device mode. If a SATA device is detected, SATA6G_1 will be disabled. [SATA] Only supports M.2 SATA devices. SATA6G_1 port cannot be used in this mode. [PCIE] Only supports M.2 PCIE devices. 28 ASUS STRIX B250G GAMING BIOS Manual