Asus ROG STRIX X670E-I GAMING WIFI ROG STRIX X670E Series BIOS Manual English - Page 51
UMC Common Options, DDR Options
View all Asus ROG STRIX X670E-I GAMING WIFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
UMC Common Options DDR Options DDR Timing Configuration This item allows you to configure DRAM timing configuration. Damage caused by use of your AMD processor outside of specification or in excess of factory settings are not covered by your system manufacturers warranty. The following items appear only when [Accept] is selected for DRAM Timing Configuration. Active Memory Timing Settings Configuration options: [Auto] [Enabled] Memory Target Speed Specifies the memory target speed in MT/s. The valid input is 2000 MT/s, 2400 MT/s, and range of 3200 MT/s ~ 12000 MT/s (stepping of 200 MT/s). The value is in decimal. The user input value will be rounded down to align with the stepping of 200 MT/s. The maximum speed defined in the JEDEC spec is 8400 MT/s, any input value that is greater than 8400 MT/s will be limited to 8400 MT/s. DDR SPD Timing Tcl Ctrl [Auto] [Manual] Follow default setting. Manually specify. The following item appears only when Tcl Ctrl is set to [Manual]. Tcl Specifies the CAS Latency. Valid values: 0x16 ~ 0x40, with a stepping of 2. The value is in hex. Trcd Ctrl [Auto] [Manual] Follow default setting. Manually specify. The following item appears only when Trcd Ctrl is set to [Manual]. Trcd Specifies the RAS# Active to CAS# Read Delay Time. Valid values: 0x8 ~ 0x3E. The value is in hex. Trp Ctrl [Auto] [Manual] Follow default setting. Manually specify. The following item appears only when Trp Ctrl is set to [Manual]. Trp Specifies Row Precharge Delay Time. Valid values: 0x8 ~ 0x3E. The value is in hex. ROG STRIX X670E Series BIOS Manual 51