Asus ROG ZENITH EXTREME ROG ZENITH EXTREME Users ManualEnglish - Page 35
ROG ZENITH EXTREME, USB 2.0 connector 10-1 pin USB1314, Thermal sensor connectors 2-pin T_SENSOR1-2
View all Asus ROG ZENITH EXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 1 5. USB 2.0 connector (10-1 pin USB1314) This connector is for USB 2.0 ports. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connector complies with USB 2.0 specification that supports up to 480 Mb/s connection speed. Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! 1 x USB 2.0 port (USB1314) at mid-board shares with ROG extension (ROG_EXT) port. 6. Thermal sensor connectors (2-pin T_SENSOR1-2) These connectors are for the thermistor cables that monitor the temperature of the devices and the critical components inside the motherboard. Connect the thermistor cable and place the sensor on the device or the motherboard's component to detect its temperature. ROG ZENITH EXTREME 1-19