Asus ROG ZENITH EXTREME ROG ZENITH EXTREME Users ManualEnglish - Page 39
LED connectors 8-pin LED_CON2; 13-pin LED_CON3, AURA RGB headers 4-pin RGB_HEADER1-2
View all Asus ROG ZENITH EXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 1 10. LED connectors (8-pin LED_CON2; 13-pin LED_CON3) These connectors are for connecting LED strips on your cover. 11. AURA RGB headers (4-pin RGB_HEADER1-2) These connectors are for RGB LED strips. The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 2A (12V), and no longer than 2 m. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • Actual lighting and color will vary with LED strip. • If your LED strip does not light up, check if the RGB LED extension cable and the RGB LED strip is connected in the correct orientation, and the 12V connector is aligned with the 12V header on the motherboard. • The LED strip will only light up under the operating system. • The LED strip is purchased separately. ROG ZENITH EXTREME 1-23