Asus RS100-X5 User Manual - Page 30

Replaceable components

Get Asus RS100-X5 - 0 MB RAM PDF manuals and user guides
UPC - 610839660971
View all Asus RS100-X5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

2.5 Replaceable components You may need to replace defective components or remove previously installed system components when installing or removing system devices. This section tells how to install or remove the following components: 1. Serial ATA hard disk drive 2. Optical disk drive 2.5.1 Installing Serial ATA drives You can install up to two (2) Serial ATA hard disk drives to the system. Follow the succeeding instructions to install each of the drives. To install a primary Serial ATA drive: 1. If you have an ODD installed, remove the ODD bay first before you install a primary SATA disk drive. To remove, disconnect the ODD cable and power cable, then use a screwdriver to remove all two screws. 2. Locate the primary Serial ATA drive plate under the optical disk drive (ODD) bay. Primary SATA drive plate 2-12 Chapter 2: Hardware setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Chapter 2:
Hardware setup
±-1±
2.5
Replaceable components
You may need to replace defective components or remove previously installed
system components when installing or removing system devices. This section tells
how to install or remove the following components:
1. Serial ATA hard disk drive
2. Optical disk drive
2.5.1
Installing Serial ATA drives
To install a primary Serial ATA drive:
1.
If you have an ODD installed,
remove the ODD bay first before
you install a primary SATA disk
drive.
To remove, disconnect the ODD
cable and power cable, then use
a screwdriver to remove all two
screws.
You can install up to two (2) Serial ATA hard disk drives to the system. Follow the
succeeding instructions to install each of the drives.
2.
Locate the primary Serial ATA drive
plate under the optical disk drive
(ODD) bay.
Primary SATA drive plate