Asus RS160-E3 PS4 RS160-E3 - Page 35
Removable components
View all Asus RS160-E3 PS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2.7 Removable components You may need to remove previously installed system components when installing or removing system devices, or when you need to replace defective components. This section tells how to remove the following components: 1. System/Device fans 2. Power supply module 3. Optical drive 2.7.1 System/Device fans The eight (8) system fans and two device fans come in a screw-less design. To uninstall a fan or pair of system fans: 1. Disconnect the corresponding fan cable from the connector on the backplane board. 2. Hold the both sides on the fan, then gently pull the fan out of the compartment. To install a fan or pair of system fans: 1. Hold the both sides on the fan, then position the fan over a fan compartment. Carefully insert the fan, or pair of fans, until it fits in place. 2. Connect the corresponding fan cable from the connector on the backplane board. ASUS RS160-E3/PS4 2-17