Asus RS260-E3 RS8 RS260-E3 - Page 150
RAID driver installation
View all Asus RS260-E3 RS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
7.1 RAID driver installation After creating the RAID sets for your server system, you are now ready to install an operating system to the independent hard disk drive or bootable array. This part provides instructions on how to install the RAID controller drivers during OS installation. 7.1.1 Creating a RAID driver disk Creating a driver disk : A floppy disk with the RAID and SCSI driver is required when installing Windows 2000/2003 Server or Linux operating system on a hard disk drive. You can create a RAID or SCSI driver disk in DOS (using the Makedisk application in the support CD). To create a RAID driver disk in DOS environment: 1. Place the motherboard support CD in the optical drive. 2. Restart the computer, then enter the BIOS Setup. 3. Select the optical drive as the first boot priority to boot from the support CD. Save your changes, then exit the BIOS Setup. 4. Restart the computer. 5. Press any key when prompted to boot from CD. Loading FreeDOS FAT KERNEL GO! Press any key to boot from CDROM... The Makedisk menu appears. 6. Place a blank, high-density floppy disk to the floppy disk drive, then select the type of RAID driver disk you want to create by typing the number before the option 7. Press . 8. Follow screen instructions to create the driver disk. 7-2 Chapter 7: Driver installation