Asus RS260-E3 RS8 RS260-E3 - Page 45

2.6 Cable connections • The bundled system cables are pre-connected before shipment. You do not need to disconnect these cables unless you will remove preinstalled components to install additional devices. • Refer to this section when reconnecting cables to ensure correct cable connections. Rear panel 1 4 3 2 13 15 12 56 7 9 8 10 11 Front panel 14 Pre-connected system cables 1. Rear fan connectors (from REAR_FAN2 of MB to FAN1 of rear fan board and from REAR_FAN1 of MB to FAN2 of rear fan board) 2. 24-pin/8-pin power connectors (from power supply to MB) 3. Floppy drive connector (from MB to floppy drive) 4. SMBus connector (from MB to SCSI backplane) 5. PANEL connectors (from MB to front panel) 6. Chassis intrusion connector (from MB to chassis) 7. SCSI-A1 connector (from MB to SCSI backplane or to external SCSI port) 8. SCSI-B1 connector (from MB to SCSI backplane) 9. Secondary IDE (from MB to optical drive) 10. Mid-fan power connector (from power supply to mid-fan board) 11. SCSI board connectors (from three SCSI backplane to MB and power supply) 12. Front USB connectors (from MB to front panel) 13. LAN LED connector and Locator LED connector/switch (from MB to front panel) 14. Locator LED connector/switch (from front panel to rear panel Locator LED/switch) 15. CPU_FAN1 connector (from MB to mid-fan board) ASUS RS260-E3 2-25