Asus RS520-E8-RS12-E User Guide - Page 109
C/A Parity Enable [Auto], Memory Topology, Memory Thermal, CK in SR [Auto]
![]() |
View all Asus RS520-E8-RS12-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
C/A Parity Enable [Auto] Allows you to enable or disable the DDR4's command address parity. Configuration options: [Auto] [Disabled] [Enabled] Memory Topology Displays memory topology with DIMM population information. Memory Thermal Allows you to configure thermal settings. Set Throttling Mode [Disabled] Configuration options: [Disabled] [OLTT] [CLTT] OLLT Peak BW [xxx] Allows you to set the peak allowed bandwidth for OLTT. This is in percentage and valid offset values is from 25-100. DIMM Tem Stat [xx] Allows you to select DIMMTEMPSTAT as temp_mid or tem_hi. Memory Power Savings Mode [Auto] Allows you to configure the CKE and other related Memory Power Savings features. Configuration options: [Auto] [Disabled] [APD On] [User Defined] [Reserve] [Reserved] Memory Power Savings Advanced Options CK in SR [Auto] Configuration options: [Auto] [Driven] [Tri-State] [Pulled Low] Pulled High] MDLL Off [Auto] Allows you to shutdown MDLL during SR when enabled. Configuration options: [Auto] [Disabled] [Enabled] MEMHOT Throttling Mode [Input-only] Allows you to shutdown MDLL during SR when enabled. Configuration options: [Disabled] [Input-only] [Output-only] ASUS RS520-E8-RS8, RS520-E8-RS12-E 5-31
![](/manual_guide/products/asus-rs520e8rs12e-user-guide-b0c5e23/109.png)