Asus RS520-E8-RS12-E User Guide - Page 42
Installing a Mezzanine card, AUXLED_CON1
View all Asus RS520-E8-RS12-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
2.5.3 Installing a Mezzanine card You can install a supported Mezzanine card on the onboard slot. To install a Mezzanine card: 1. Remove the slot bay from the Mezzanine card expansion slot. 2. Prepare your Mezannine card and the signal cable. Connect the signal transmission end (white) to the AUXLED_CON header on the motherboard. AUXLED_CON1 3. Match and insert the four (4) screw holes on the Mezzanine card into the four (4) stand screws on the chassis, then insert the Mezzanine card to the slot on the motherboard. 2-18 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-18
2.5.3
Installing a Mezzanine card
You can install a supported Mezzanine card on the onboard slot.
To install a Mezzanine card:
1.
Remove the slot bay from the Mezzanine
card expansion slot.
3.
Match and insert the four (4) screw holes on the Mezzanine card into the four (4) stand
screws on the chassis, then insert the Mezzanine card to the slot on the motherboard.
AUXLED_CON1
2.
Prepare your Mezannine card and the signal cable. Connect the signal transmission
end (white) to the AUXLED_CON header on the motherboard.