Asus RS520-E8-RS12-E User Guide - Page 64
Internal connectors, Serial ATA 6.0 / 3.0 Gbps connector 7-pin SATA6 [Light Blue]
View all Asus RS520-E8-RS12-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4.3 Internal connectors 1. Serial ATA 6.0 / 3.0 Gbps connector (7-pin SATA6 [Light Blue]) Supported by the Intel® 610 series Chipset, this connector is for the Serial ATA signal cables for Serial ATA hard disk drives that allows up to 6 Gbps of data transfer rate. The actual data transfer rate depends on the speed of Serial ATA hard disks installed. 2. Power Supply SMBus connector (5-pin PSUSMB1) This connector allows you to connect SMBus (System Management Bus) to the PSU (power supply unit) to read PSU information. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. This connector functions only when you install the ASUS ASMB8. 4-8 Chapter 4: Motherboard information
Chapter 4: Motherboard information
4-8
4.3
Internal connectors
1.
Serial ATA 6.0 / 3.0 Gbps connector (7-pin SATA6 [Light Blue])
Supported by the Intel
®
610 series Chipset, this connector is for the Serial ATA signal
cables for Serial ATA hard disk drives that allows up to 6 Gbps of data transfer rate.
The actual data transfer rate depends on the speed of Serial ATA hard disks installed.
2.
Power Supply SMBus connector (5-pin PSUSMB1)
This connector allows you to connect SMBus (System Management Bus) to the PSU
(power supply unit) to read PSU information. Devices communicate with an SMBus
host and/or other SMBus devices using the SMBus interface.
This connector functions only when you install the ASUS ASMB8.