Asus RS520-E8-RS12-E User Guide - Page 176
Red Hat, Enterprise Linux OS 5.6, To install or upgrade in text mode, type: linux text <ENTER>.
View all Asus RS520-E8-RS12-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Red Hat® Enterprise Linux OS 5.6 To install the LSI MegaRAID controller driver when installing Red Hat® Enterprise OS: 1. Boot the system from the Red Hat® OS installation CD. 2. At the boot:, type linux dd noprobe=ata1 noprobe=ata2..., then press . The number of ata varies with the hard disk drive number you have when building a RAID set. For example, if you want to build a RAID set with 6 hard disk drives, type command line: linux dd noprobe=ata1 noprobe=ata2 noprobe=ata3 noprobe=ata4 noprobe=ata5 noprobe=ata6. - To install or upgrade in graphical mode, press the key. - To install or upgrade in text mode, type: linux text . - Use the function keys listed below for more information. [F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue] boot: linux dd noprobe=ata1 noprobe=ata2 3. Select Yes using the key when asked if you have the driver disk, then press . Main Menu Do you have a driver disk? Yes No 4. Insert the Red Hat® Enterprise RAID driver disk to the USB floppy disk drive, select OK, then press . Insert Driver Disk Insert your driver disk into /dev/fd0 and press "OK" to continue. OK Back The drivers for the RAID card are installed to the system. 7-6 Chapter 7: Driver installation