Asus RS700-E8-RS8 User Guide - Page 68
Chassis Intrusion, pin INTRUSION1, RAID key connector 2-pin RAID_KEY1
View all Asus RS700-E8-RS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
15. Chassis Intrusion (2-pin INTRUSION1) These leads are for the intrusion detection feature for chassis with intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high level signal to these leads to record a chassis intrusion event. The default setting is to short the CHASSIS# and the GND pin by a jumper cap to disable the function. 16. RAID key connector (2-pin RAID_KEY1) This connector is reserved for the LSI MegaRAID 5 function (PCH Software RAID). Plug the optional RAID key to enable it. 4-18 Chapter 4: Motherboard information
Chapter 4: Motherboard information
4-18
15.
Chassis Intrusion
(2-pin INTRUSION1)
These leads are for the intrusion detection feature for chassis with intrusion sensor or
microswitch. When you remove any chassis component, the sensor triggers and sends
a high level signal to these leads to record a chassis intrusion event. The default setting
is to short the CHASSIS# and the GND pin by a jumper cap to disable the function.
16.
RAID key connector (2-pin RAID_KEY1)
This connector is reserved for the LSI MegaRAID 5 function (PCH Software RAID).
Plug the optional RAID key to enable it.