Asus RS920-E7 RS8 User Guide - Page 35
Hard disk drives
View all Asus RS920-E7 RS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2.4 Hard disk drives The system supports eight hot-swap SATAII/SAS hard disk drives. The hard disk drive installed on the drive tray connects to the motherboard SATAII/SAS ports via the SATAII/SAS backplane. To install a hot-swap SATAII/SAS HDD: spring lock 1. Release a drive tray by pushing the spring lock to the right, then pulling the tray lever outward. The drive tray ejects slightly after you pull out the lever. 2. Firmly hold the tray lever and pull the drive tray out of the bay. 3. Take note of the drive tray holes. Each side has three holes to fit different types of hard disk drives. Use two screws on each side to secure the hard disk drive. 4. Place a SATAII/SAS hard disk drive on the tray, then secure it with four screws. ASUS RS920-E7/RS8; RS926-E7/RS8 2-13