Asus RT-N12 User Manual - Page 8
Rear panel, LAN1-LAN4, DC IN, Restore, Operation, selector, Router IP Sharing mode, Repeater - set up
View all Asus RT-N12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Rear panel Label WAN LAN1-LAN4 DC IN WPS Restore Operation mode selector Description Connect an RJ-45 Ethernet cable to this port to establish WAN connection. Connect RJ-45 Ethernet cables to these ports to establish LAN connection. Insert the AC adapter into this port to connect your router to a power source. Press this button to establish wireless connection. Press this button for more than five seconds to restore the system to its factory default settings. Item Operation mode selector Description Use this selector to choose an operation mode: Router (IP Sharing mode): In the Router mode, the wireless router connects to the Internet via PPPoE, Automatic IP, PPTP, L2TP, or Static IP, and provides you with wireless radio signal. The NAT, firewall, and IP sharing services for LAN clients are enabled. Repeater: In this mode, the wireless router extends your wireless network coverage and provides you with higher quality wireless radio signal. The NAT, firewall, and IP sharing services are disabled. Access Point (AP): In this mode, the wireless router receives the WAN IP address from the router connected to the WAN port and provides you with wireless radio signal. The NAT, firewall, and IP sharing services are disabled. RT-N12 Chapter 1: Knowing your wireless router