Asus S1-P112 Spresso Hardware User Manual - Page 74
Internal Graphic Accelerate Mode [Auto]
View all Asus S1-P112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
DRAM RAS# to CAS# Delay [4 Clocks] This item controls the latency between the DDR SDRAM active command and the read/write command. Configuration options: [4 Clocks] [3 Clocks] [2 Clocks] DRAM Precharge Delay [8 Clocks] Configuration options: [8 Clocks] [7 Clocks] [6 Clocks] [5 Clocks] DRAM Burst Length [8 Clocks] Configuration options: [4 Clocks] [8 Clocks] Internal Graphic Accelerate Mode [Auto] Allows you to select the internal graphic acceleration mode. Configuration options: [2T] [1T] [Auto] Graphic Adapter Priority [AGP/Int-VGA] This option allows you to select the graphics controller to use as primary boot device. Configuration options: [Internal VGA] [AGP/PCI] [PCI/AGP] [PCI/Int-VGA] Onboard Video Memory [Enabled, 8MB] Allows you to set the size of the onboard video memory. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 4MB] [Enabled, 8MB] [Enabled, 16MB] [Enabled, 32MB] Graphics Aperture Size [64MB] Allows you to select the mapped memory for AGP graphic data. Configuration options: [4MB] [8MB] [16MB] [32MB] [64MB] [128MB] [256MB] Boot Display Device [Auto] Allows you to select the boot display device. Configuration options: [Auto] [CRT] [TV] [EFP] [LFP] [CRT+EFP] [CRT+LFP] Flat Panel Display [640x480LVDS] Allows you to select the flat panel display resolution when you selected LCD Flat Panel [LFP] as your boot display device. Configuration options: [640x480LVDS] [800x600LVDS] [1024x768LVDS] [1280x1024LVDS] [1400x1050LVDS] [1600x1200LVDS] [640x480CMOS] [800x600CMOS] [1024x768CMOS] [1280x1024CMOS] [1400x1050CMOS] [1600x1200CMOS] 4-20 Chapter 4: BIOS information