Home » Asus Manuals » Motherboards » Asus SABERTOOTH 55i » Manual Viewer

Asus SABERTOOTH 55i User Manual - Page 67

ASUS BIOS Updater, ASUS CrashFree BIOS 3 utility

UPC - 610839173174

View all Asus SABERTOOTH 55i manuals

Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

3.2.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at support.asus.com and save it to a USB flash drive. Recovering the BIOS To recover the BIOS: 1. Turn on the system. 2. Insert the motherboard support DVD to the optical drive, or the USB flash drive containing the BIOS file to the USB port. 3. The utility automatically checks the devices for the BIOS file. When found, the utility reads the BIOS file and starts flashing the corrupted BIOS file. 4. Turn off the system after the utility completes the updating process and power on again. 5. The system requires you to enter BIOS Setup to recover BIOS setting. To ensure system compatibility and stability, we recommend that you press to load default BIOS values. DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure! 3.2.4 ASUS BIOS Updater The ASUS BIOS Updater allows you to update the BIOS file in DOS environment using a bootable floppy disk with the updated BIOS file. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process. Creating a bootable floppy disk Do either one of the following to create a bootable floppy disk. DOS environment 1. Insert a 1.44MB floppy disk into the floppy disk drive. For motherboards without an onboard floppy connector, use a USB floppy disk drive instead. 2. At the DOS prompt, type format A:/S then press . Chapter 3 ASUS SABERTOOTH 55i 3-5

Section	Page
Contents	3
Notices	7
Safety information	8
About this guide	9
SABERTOOTH 55i specifications summary	11
Chapter 1: Product introduction	15
1.1 Welcome!	15
1.2 Package contents	15
1.3 Special features	16
1.3.1 Product highlights	16
1.3.2 “TUF ENGINE!” Power Design	17
1.3.3 “Ultimate COOL!” Thermal Solutions	17
1.3.4 “Safe & Stable!” Guardian Angel	18
1.3.5 ASUS exclusive features	18
Chapter 2: Hardware information	21
2.1 Before you proceed	21
2.2 Motherboard overview	22
2.2.1 Motherboard layout	22
2.2.2 Layout contents	23
2.2.3 Placement direction	24
2.2.4 Screw holes	24
2.3 Central Processing Unit (CPU)	25
2.3.1 Installing the CPU	25
2.3.2 Installing the CPU heatsink and fan	28
2.3.3 Uninstalling the CPU heatsink and fan	29
2.4 System memory	30
2.4.1 Overview	30
2.4.2 Memory configurations	31
2.4.3 Installing a DIMM	37
2.4.4 Removing a DIMM	37
2.5 Expansion slots	38
2.5.1 Installing an expansion card	38
2.5.2 Configuring an expansion card	38
2.5.3 Interrupt assignments	39
2.5.4 PCI slots	40
2.5.5 PCI Express 2.0 x1 slots (2.5GT/s)	40
2.5.6 PCI Express 2.0 x16 slots	40
2.6 Jumpers	42
2.7 Onboard switches	43
2.8 Connectors	46
2.8.1 Rear panel connectors	46
2.8.2 Audio I/O connections	47
2.8.3 Internal connectors	50
2.8.4. ASUS Q-Connector (system panel)	59
2.9 Onboard LEDs	60
2.10 Starting up for the first time	61
2.11 Turning off the computer	61
Chapter 3: BIOS setup	63
3.1 Knowing BIOS	63
3.2 Updating BIOS	63
3.2.1 ASUS Update utility	64
3.2.2 ASUS EZ Flash 2 utility	66
3.2.3 ASUS CrashFree BIOS 3 utility	67
3.2.4 ASUS BIOS Updater	67
3.3 BIOS setup program	70
3.3.1 BIOS menu screen	70
3.3.2 Menu bar	70
3.3.3 Navigation keys	71
3.3.4 Menu items	71
3.3.5 Submenu items	71
3.3.6 Configuration fields	71
3.3.7 Pop-up window	71
3.3.8 Scroll bar	71
3.3.9 General help	71
3.4 Main menu	72
3.4.1 SATA 1-6	72
3.4.2 Storage Configuration	74
3.4.3 AHCI Configuration	75
3.4.4 System Information	75
3.5 Ai Tweaker menu	76
3.5.1 Ai Overclock Tuner [Auto]	76
3.5.2 CPU Ratio Setting [Auto]	77
3.5.3 Intel(R) SpeedStep(TM) Tech [Enabled]	77
3.5.8 DRAM Frequency [Auto]	78
3.5.9 QPI Frequency [Auto]	78
3.5.10 DRAM Timing Control	78
3.5.4 Intel(R) TurboMode Tech [Enabled]	78
3.5.5 Xtreme Phase Full Power Mode [Auto]	78
3.5.6 BCLK Frequency [XXX]	78
3.5.7 PCIE Frequency [XXX]	78
3.5.11 CPU Differential Amplitude [Auto]	80
3.5.12 CPU Clock Skew [Auto]	80
3.5.13 CPU Voltage Mode [Offset]	80
3.5.14 IMC Voltage [Auto]	81
3.5.15 DRAM Voltage [Auto]	81
3.5.16 CPU PLL Voltage [Auto]	81
3.5.17 PCH Voltage [Auto]	82
3.5.18 DRAM DATA REF Voltage on CHA/B [Auto]	82
3.5.19 DRAM CTRL REF Voltage on CHA/B [Auto]	82
3.5.20 Load-Line Calibration [Auto]	82
3.5.21 CPU Spread Spectrum [Auto]	82
3.5.22 PCIE Spread Spectrum [Auto]	82
3.6 Advanced menu	83
3.6.1 CPU Configuration	83
3.6.2 North Bridge Configuration	85
3.6.3 Onboard Devices Configuration	86
3.6.4 USB Configuration	87
3.6.5 PCIPnP	88
3.6.6 Intel VT-d [Disabled]	88
3.6.7 T.Probe [Enabled]	88
3.7 Power menu	89
3.7.1 Suspend Mode [Auto]	89
3.7.2 Repost Video on S3 Resume [No]	89
3.7.3 ACPI 2.0 Support [Disabled]	89
3.7.4 ACPI APIC Support [Enabled]	89
3.7.5 EuP Ready [Disabled]	89
3.7.6 APM Configuration	90
3.7.7 Hardware Monitor	91
3.8 Boot menu	92
3.8.1 Boot Device Priority	92
3.8.2 Boot Settings Configuration	93
3.8.3 Security	94
3.9 Tools menu	96
3.9.1 ASUS O.C. Profile	96
3.9.2 Drive Xpert Configuration	98
3.9.3 AI NET 2	99
3.9.4 ASUS EZ Flash 2	99
3.10 Exit menu	100
Chapter 4: Software support	101
4.1 Installing an operating system	101
4.2 Support DVD information	101
4.2.1 Running the support DVD	101
4.2.2 Obtaining the software manuals	102
4.3 Software information	103
4.3.1 ASUS PC Probe II	103
4.3.2 ASUS Fan Xpert	104
4.3.3 VIA® High Definition Audio utility	105
4.3.4 ASUS Drive Xpert	106
4.3.5 ASUS T.Probe	107
4.4 RAID configurations	108
4.4.1 RAID definitions	108
4.4.2 Installing Serial ATA hard disks	109
4.4.3 Setting the RAID item in BIOS	109
4.4.4 Intel® Matrix Storage Manager option ROM utility	109
4.5 Creating a RAID driver disk	113
4.5.1 Creating a RAID driver disk without entering the OS	113
4.5.2 Creating a RAID driver disk in Windows®	113
4.5.3 Installing the RAID driver during Windows® OS installation	114
4.5.4 Using a USB floppy disk drive	114
Chapter 5: Multiple GPU technology support	117
5.1 ATI® CrossFireX™ technology	117
5.1.1 Requirements	117
5.1.2 Before you begin	117
5.1.3 Installing two CrossFireX™ graphics cards	118
5.1.4 Installing the device drivers	119
5.1.5 Enabling the ATI® CrossFireX™ technology	119
5.2 NVIDIA® SLI™ technology	121
5.2.1 Requirements	121
5.2.2 Installing two SLI-ready graphics cards	121
5.2.3 Installing the device drivers	122

Match case Limit results 1 per page

ASUS SABERTOOTH 55i

3-5

Chapter 3

3.2.4

ASUS BIOS Updater

The ASUS BIOS Updater allows you to update the BIOS ﬁle in DOS environment using a

bootable ﬂoppy disk with the updated BIOS ﬁle. This utility also allows you to copy the current

BIOS ﬁle that you can use as a backup when the BIOS fails or gets corrupted during the

updating process.

Creating a bootable ﬂoppy disk

Do either one of the following to create a bootable ﬂoppy disk.

DOS environment

Insert a 1.44MB ﬂoppy disk into the ﬂoppy disk drive. For motherboards without an

onboard ﬂoppy connector, use a USB ﬂoppy disk drive instead.

At the DOS prompt, type format A:/S then press <Enter>.

3.2.3

ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the

BIOS ﬁle when it fails or gets corrupted during the updating process. You can restore a

corrupted BIOS ﬁle using the motherboard support DVD or a USB ﬂash drive that contains

the BIOS ﬁle.

The BIOS ﬁle in the motherboard support DVD may be older than the BIOS ﬁle published

on the ASUS official website. If you want to use the newer BIOS file, download the file at

support.asus.com and save it to a USB ﬂash drive.

Recovering the BIOS

To recover the BIOS:

Turn on the system.

Insert the motherboard support DVD to the optical drive, or the USB ﬂash drive

containing the BIOS ﬁle to the USB port.

The utility automatically checks the devices for the BIOS ﬁle. When found, the utility

reads the BIOS file and starts flashing the corrupted BIOS file.

Turn off the system after the utility completes the updating process and power on

again.

The system requires you to enter BIOS Setup to recover BIOS setting. To ensure

system compatibility and stability, we recommend that you press <F2> to load default

BIOS values.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause

system boot failure!