Asus TS100-E3 PI2 User Guide - Page 61
the LSI Logic Embedded SATA RAID Setup Utility default; or, place
View all Asus TS100-E3 PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
6 . Gigabit LAN controller setting (3-pin LAN_EN1) These jumpers allow you to enable or disable the onboard Broadcom® BCM5753 Gigabit LAN1 or LAN2 controller. Set to pins 1-2 to activate the Gigabit LAN controller. P5MT-MX/C ® LAN_EN1 2 1 Enable (Default) 3 2 Disable P5MT-MX/C LAN_EN1 Setting 7 . RAID controller selection (3-pin RAID_SEL1) This jumper allows you to select the RAID configuration utility to use when you create disk arrays. Place the jumper caps over pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup Utility (default); or, place the jumper caps to pins 2-3 for the Intel® Matrix Storage Manager. P5MT-MX/C ® RAID_SEL1 12 23 LSI RAID ROM INTEL RAID ROM (Default) P5MT-MX/C RAID_SEL1 Setting ASUS TS100-E3 3-7
3-7
3-7
3-7
3-7
3-7
ASUS TS100-E3
ASUS TS100-E3
ASUS TS100-E3
ASUS TS100-E3
ASUS TS100-E3
6.
6.
6.
6.
6.
Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)
These jumpers allow you to enable or disable the onboard Broadcom
®
BCM5753 Gigabit LAN1 or LAN2 controller. Set to pins 1-2 to activate
the Gigabit LAN controller.
7.
7.
7.
7.
7.
RAID controller selection (3-pin RAID_SEL1)
RAID controller selection (3-pin RAID_SEL1)
RAID controller selection (3-pin RAID_SEL1)
RAID controller selection (3-pin RAID_SEL1)
RAID controller selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper caps over pins 1-2 if you want to use
the LSI Logic Embedded SATA RAID Setup Utility (default); or, place the
jumper caps to pins 2-3 for the Intel
®
Matrix Storage Manager.
P5MT-MX/C LAN_EN1 Setting
Enable
(Default)
Disable
LAN_EN1
2
1
2
3
P5MT-MX/C
RAID_SEL1
LSI RAID ROM
(Default)
INTEL RAID ROM
2
1
23
P5MT-MX/C RAID_SEL1 Setting
P5MT-MX/C