Asus TUF Z270 MARK 1 TUF Z270 MARK 1 Users manual ENGLISH - Page 39
Basic Installation, 2.1 Building your PC system, 2.1.1 IO Cover installation
View all Asus TUF Z270 MARK 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 2: Basic Installation Basic Installation 2.1 Building your PC system 2 The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. 2.1.1 IO Cover installation The ASUS TUF Z270 MARK 1 motherboard package can be installed with a 40 mm assistant fan for additional cooling solution and better airflow. To install the 40 mm assistant fan: 1. Locate and remove the screw on the back I/O (A) then remove the back I/O fan cover lid (B). Keep the screws for later use. Chapter 2 2. Position and install the 40 mm assistant fan* in an orientation such that the fan draws air into the chassis for optimal heat dissipation and air ventilation. 3. Match the two (2) screw holes on the 40 mm assistant fan with the two (2) screw holes on the cover lid and secure it with two (2) screws**. ASUS TUF Z270 MARK 1 * The 40mm assistant fan is purchased separately. ** When purchasing your assistant fan, ensure to check with your vendor for the assistant fan screws. 2-1