Asus TW300-E5/PI4 User Manual - Page 135
Installing the RAID controller driver
UPC - 610839662715
View all Asus TW300-E5/PI4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
6.1.3 Installing the RAID controller driver Windows® XP OS To install the RAID controller driver when installing Windows® XP OS 1. Boot the computer using the Windows® XP installation CD. The Windows® XP Setup starts. 2. Press when the message "Press F6 if you need to install a third party SCSI or RAID driver..." appears at the bottom of the screen. 3. When prompted, press to specify an additional device. Windows Setup Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage devices(s): * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device ENTER=Continue F3=Exit 4. Insert the RAID driver disk you created earlier to the floppy disk drive, then press . Windows Setup Please insert the disk labeled Manufacturer-supplied hardware support disk into Drive A: * Press ENTER when ready. ENTER=Continue ESC=Cancel F3=Exit ASUS TW300-E5/PI4 6-3