Asus TX97-X User Manual - Page 32

R R III. INSTALLATION (Connectors) III. INSTALLATION 19. IrDA / Fast IR-Compliant infrared module connector (IR) This connector supports the optional wireless transmitting and receiving infrared module. This module mounts to a small opening on system cases that support this feature. You must also configure the setting through "UART2 Use Infrared" in Chipset Features Setup to select whether UART2 is directed for use with COM2 or IrDA. Use the five pins as shown on the Back View and connect a ribbon cable from the module to the motherboard according to the pin definitions. FIRRX GND +5V IRRX IRTX Front View Back View Infrared Module Connector IRTX +5V GND NC IRRX For the infrared feature to be available, you must connect an optional Infrared (IrDA) module to the motherboard. 20. ATX Power Supply Connector (20-pin block) This connector connects to a ATX power supply. The plug from the power supply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned. IMPORTANT: Make sure that the ATX power supply can take at least 10mAmp load on the 5Volt standby lead (5VSB). You may experience difficulty in powering on your system without this. ATX Power Connector 12.0V 5VSB PW-0K GND 5.0V GND 5.0V GND 3.3V 3.3V 5.0V 5.0V -5.0V GND GND GND PS-ON GND -12.0V 3.3V 32 ASUS TX97-X User's Manual