Asus V2-P5G965 User Manual - Page 61
Chassis Intrusion Connector, IEEE 1394a Connector
View all Asus V2-P5G965 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
9. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and " Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. P5B-VM +5VSB_MB Chassis Signal GND R Chassis Intrusion Connector CHASSIS (Default) 10. IEEE 1394a port connector (10-1 pin IE1394_2) This connector is for a IEEE 1394a port. Connect the IEEE 1394a module cable to this connector, then install the module to a slot opening at the back of the system chassis. P5B-VM R TPA1GND TPB1+12V GND IEEE 1394a Connector IE1394_2 1 The IEEE 1394a module is purchased separately. ASUS V-Series P5G965 TPA1+ GND TPB1+ +12V 4-11