Asus VINTAGE-AH1 Vintage-AH1 User's Manual for English Edtion - Page 97

Internal Graphics This menu allows you to change the onboard graphics controller parameters and related features. Select an item then press Enter to display the configuration options. Internal Graphics Internal Graphics Mode UMA Frame Buffer Size Graphics Clock Mode Surround View Multifunction TV Standard Expansion Mode [UMA] [64MB] [Sync] [Disabled] [Disabled] [NTSC] [Disabled] Internal Graphics Mode [UMA] Disables or sets the internal graphics controller mode. Configuration options: [Disabled] [UMA] UMA Frame Buffer Size [64 MB] Sets the UMA frame buffer size. The UMA frame buffer size is based on total physical memory. If you set a value higher than the maximum UMA value, the BIOS will set it to the maximum UMA value. Refer to the table below when setting the UMA frame buffer size. Configuration options: [16 MB] [32 MB] [64 MB] [128 MB] [256 MB] System Memory 32 MB 128 MB 256 MB 384 MB 512 MB 1 GB and above Minimum UMA 16 MB 32 MB 32 MB 32 MB 32 MB 32/128 MB Recommended UMA 16 MB 32 MB 32 MB 64 MB 64 MB 128 MB Maximum UMA 16 MB 32 MB 64 MB 128 MB 256 MB 256 MB Multifunction [Disabled] Disables or enables the internal graphics controller multifunction feature. Configuration options: [Disabled] [Enabled] TV Standard [NTSC] Allows you to set the TV standard for your area. Configuration options: [NTSC] [PAL] [PAL-M] [PAL-60] [NTSC-JAP] [PAL-CN] [PAL-N] [SCART_RGB] Expansion Mode [Disabled] Enables or disables the expansion mode. Configuration options: [Disabled] [Enabled] 5-24 Chapter 5: BIOS Setup