Asus VivoMini UN42 VivoMini memory wireless card and solid state driveSSD inst - Page 1

CA9955 Revised Edition V2 December 2014 VivoMini memory, wireless card, and solid state drive (SSD) installation guide Your VivoMini comes with the following items. Please contact ASUS Service Center if you cannot find the following items: • 4 pcs holed rubber foot • 3 pcs 3mm round screws, 1 hexagon screw IMPORTANT! • It is recommended that you install or upgrade the memory modules, wireless card, and solid state drive (SSD), under professional supervision. Visit an ASUS service center for further assistance. • Ensure that your hands are dry before proceeding with the rest of the installation process. Before installing any of the features in this guide, use a grounded wrist strap or touch a safely grounded object or metal object to avoid damaging them due to static electricity. Installing or upgrading memory modules Your VivoMini comes with two SO-DIMM memory slots that allow you to install two 2GB, 4GB, or 8GB unbuffered with non-ECC 1.35 V DDR3 204-pin SO-DIMMs for a maximum of 16GB memory. IMPORTANT! Refer to http://www.asus.com for the list of compatible DIMMs. You can only install 1.35 V DDR3 SO-DIMM to the VivoMini's DIMM slots. To install or upgrade the memory modules: 1. Turn off your VivoMini then disconnect all cables and peripherals. 2. Place the VivoMini on a flat stable surface, with its top side facing down. 15060-4790R100 1