Asus WL-566gM User Manual - Page 8
PPTP user, Static IP user - user manual
UPC - 610839730711
View all Asus WL-566gM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
WL-566gM Wireless Router User Manual PPTP user If you are using PPTP services, select ADSL connection that requires username, password and IP address. It is know as PPTP. Fill in the username, password and IP address provided by your ISP into the fields. Click Next to continue. herk036@adsl-comfort Static IP user If you are using ADSL or other connection type that uses static IP addresses, select ADSL or other connection type that uses static IP address. Input the IP address, subnet mask, and default gateway provided by your ISP. You can choose to specify DNS servers, or select to get DNS information automatically. 3 After the connection type setting is complete, you are to set up your wireless interface. Specify to your wireless router an SSID (Service Set Identifier), which is a unique identifier attached to packets sent over WLAN. This identifier emulates a password when a device attempts to communicate with your wireless router via WLAN. To connect to a wireless router, your wireless card must use the same SSID. If you want to protect transmitted data, select a middle or high Security Level to enable encryption methods. Medium: Only users with the same WEP key settings can connect to your wireless router and transmit data using 64bits or 128bits WEP key encryption. High: Only users with the same WPA pre-shared key settings can connect to your wireless router and transmit data using TKIP encryption. 8