Asus Z87-WS User Guide - Page 56
This connector is for a single SATA 6.0Gb/s Solid-State Drive SSD. Connect the SSD
View all Asus Z87-WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
13. mSATA connector This connector is for a single SATA 6.0Gb/s Solid-State Drive (SSD). Connect the SSD to the mSATA port. 14. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. 1-40 Chapter 1: Product introduction Chapter 1