Asus Z97-P User Guide - Page 25
Internal connectors, Z97-P, Fan connectors
View all Asus Z97-P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
1.7.2 Internal connectors 1. Serial port connector (10-1 pin COM) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM PIN 1 RXD DTR DSR CTS DCD TXD GND RTS RI Z97-P Z97-P Serial port (COM) connector The COM module is purchased separately. 2. CPU and chassis fan connectors (4-pin CPU_FAN, and 4-pin CHA_FAN1/2) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU_FAN CHA_FAN2 CPU FAN PWM CPU FAN IN CPU FAN PWR GND CHA FAN PWM CHA FAN IN CHA FAN PWR GND CHA_FAN1 GND CHA FAN PWR CHA FAN IN Z97-P CHA FAN PWM Z97-P Fan connectors • DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors. • Ensure that the CPU fan cable is securely installed to the CPU fan connector. ASUS Z97-P 1-15