Audiovox AVXMTG9B User Manual - Page 22

TROUBLE SHOOTING PROBLEM IR remote is inoperative. Disc will not play or wrong region is displayed. No Disc error message appears. SOLUTION 1. Verify that the batteries in the remote are fresh. 2. Verify that the infrared remote sensor is not obstructed. 1 Insert a disc with the label side facing up towards the headliner. 2. Check the type of the disc you put into the disc tray. This DVD only plays DVD, audio CD, JPEG, and MP3. 3. Both the unit and the disc are coded by region. If the regional code doesn't match, the disc can't be played. 1. Insert a disc with the label side facing up towards the headliner. Play starts, but then stops immediately. No sound or distorted sound. Can't advance through a movie. 1. The disc is dirty. Clean it. 2. The disc is damaged. Try another disc. 3. Condensation has formed. Allow player to dry out. 1. Make sure your DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks. 2. If you are using 2-channel IR headphones, make sure you turn on the IR headphone power. Make sure the correct channel (A-B) is selected. 3. Make sure the modulator is ON and the proper frequency has been selected. 4. Make sure the IR transmitter has been turned on. 1. You can't advance through the opening credits and warning information that appears at the beginning of a movie because the disc is programmed to prohibit that action. 20