Audiovox VM9314 Operating Instructions - Page 18
Source
View all Audiovox VM9314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
VM9314 Mute/Line Mute Press the rotary encoder button (1) on the front panel orthe MUTE button (3) on the remote to mute the volume from the unit. Press the rotary encoder button again to restore the volume. "MUTE" is displayed on the LCD. Adjusting the volume or using any of the audio setup features cancels the mute function. If the "MUTE" wire is connected, audio output mutes when a telephone call is received by the car phone (using optional BTM15) or when verbal navigation is played (using optional NAV102). Playing Source Selection When the monitor is closed, press the SRC button on the front panel (2) or remote control (8) to change between available audio playing sources in the following order: RADIO, DISC, USB/iPod, SD, BT, NAV, SAT, AUX1, AUX2 and CAMERA. The mode is displayed on the LCD screen. Source Menu You can also use the touch screen to change the source through the SOURCE MENU. To access the SOURCE MENU, touch the top left corner of the screen or press the SRC button on the front panel (2) or remote control (8). @ @ RADIO ~ NAV SOURCE MENU r@J CV DISC USB/lPod @® "Q SAT AUX1 1;;;1 II ® SO ~ AUX2 e ® BT CAMERA Touch the RADIO, DISC, USB/iPod, SD, BT, NAV, SAT, AUX1 , AUX2 or CAMERA button to select the corresponding source. You can also use voice control to select a source. See "iPod Voice Control" on page 19. NOTE: When an iPodliPhone is attached to the USB port, "/POD" appears instead of the text "USBliPod. " 15